Microchip Technology MCP2558FD-H/SN, CAN Transceiver 8Mbit/s 1-Channel CAN, 8-Pin SOIC

  • RS Stock No. 177-1627
  • Mfr. Part No. MCP2558FD-H/SN
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The MCP2557/8FD is a Microchip Technology Inc. high-speed CAN transceiver/CAN Flexible Data Rate Transceiver with Silent Mode. The device family members are MCP2557FD with No Connect pin 5 & MCP2558FD with VIO pin internal level shifting

Supports both Classic CAN or CAN Flexible Data Rate applications
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Supports Silent Mode
Prevent disruption on the network due to local fault
Increased system reliability through redundancy
Test connection of the network
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.7V to 5.5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Detection of Ground Fault:
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)

Specifications
Attribute Value
Maximum Data Rate 8Mbit/s
Number of Transceivers 1
Standard Supported CAN
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Minimum Operating Supply Voltage 4.5 V
600 In stock for delivery within 3 working days
Price Each (In a Tube of 100)
SGD 0.931
(exc. GST)
SGD 0.996
(inc. GST)
units
Per unit
Per Tube*
100 +
SGD0.931
SGD93.10
*price indicative
Related Products
The MCP2517FD is a cost-effective and small-footprint External ...
Description:
The MCP2517FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking ...
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The MCP2561/2 is Microchip Technology Inc. second generation ...
Description:
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with ...
The MCP2561/2FD is a Microchip Technology Inc. second ...
Description:
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum ...