Raytech Unshielded Straight Gel Filled Cable Jointing Kit 4 x 16 → 35mm²

  • RS Stock No. 713-3832
  • Mfr. Part No. Magic Joint 35
  • Manufacturer Raytech
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Magic Joint Cable Jointing Kit

The Raytech Magic Joint is a cable joint suitable for extruded 0.6/1 kV cables. It is easy to install and is formed by two plastic half shells that, once closed on the cable after conductor connection, are then filled with the magic fluid. This cable jointing kit is ideal for installations in ducts or traps underground, submerged or directly exposed to the weather. Magic joint has no shelf life, is safe, non toxic and re-enterable even after long working periods. Fast in cross linking without any increase of temperature, the insulation has high dielectric characteristics

No shelf life
Completely non toxic
Cure time less than 10 minutes at room temperature
Joints are re-enterable even after log working periods
Degree of protection higher than IP68
Can be installed under water at any depth
Can be used safely in unventilated and confined areas

Note

Splices/ Connectors should be ordered separately to suit the cable type or application

Approvals

CEI EN 50393; CEI 20-33
Class 2 in accordance with CEI 64-8
Degree of protection higher than IP68 in accordance with IEC 529

Supplied with

1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions.

Supplied with

1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions

Specifications
Attribute Value
Application Unshielded
Number of Cores 4
Dimensions 232 x 70mm
Kit Includes Cable Ties, Enclosure with Phase Separator, Instructions, Polymeric Resin, Sealing Tape
Cable Size 4 x 16 → 35mm²
Joint Type Straight
Material Gel Filled
4 In stock for delivery within 4 working days
Price Each
SGD 73.06
(exc. GST)
SGD 78.17
(inc. GST)
units
Per unit
1 - 14
SGD73.06
15 - 49
SGD71.79
50 +
SGD70.53
Related Products
The Atmel-ICE series consists of development tools for ...
Description:
The Atmel-ICE series consists of development tools for debugging and programming ARM Cortex-M based Atmel SAM and Atmel AVR microcontrollers with on-chip debug capability. The Atmel-ICE series supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces and is compatible ...
3 and 4 Compartment floor box bases, manufactured ...
Description:
3 and 4 Compartment floor box bases, manufactured in pre-galvanised steel and polycarbonate/ABS. The floor box base is supplied empty and with no lead, wiring accessories and leads can be bought separately. Supplied emptyRecommended hole cut-out size : 340-342 mm ...
The Avago Technologies AFBR-0547Z Evaluation Kit allows evaluation ...
Description:
The Avago Technologies AFBR-0547Z Evaluation Kit allows evaluation of the fibre optic transmitter AFBR-1629Z and AFBR-2529Z receiver devices. The board permits connection via a TTL input signal to a waveform/pattern generator. It also lets you monitor the receiver. The logic ...
Fluke SCC120B special value kit consists of soft ...
Description:
Fluke SCC120B special value kit consists of soft carrying case, magnetic hanger and screen protector. This kit does not include an optically isolated OC4-USB interface cable. If you require one, please see RS Stock No. 493-5540.