NXP 74HC244D,653 10-Channel Buffer & Line Driver, 3-State, 2 → 6 V, 20-Pin SOIC

  • RS Stock No. 136-2147
  • Mfr. Part No. 74HC244D,653
  • Manufacturer Nexperia
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Use our solutions to improve signal integrity between lower drive outputs and higher loads. They include mixed 5 V and 3.3 V applications, with low propagation delay, and improved current drive and signal levels. Great in standard and advanced systems from TVs and phones to industrial monitoring

Mixed 5 V and 3.3 V applications
Improved current drive and voltage level of signals
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
TTL input options
3-state output options
Overvoltage tolerant options
Registered options

The 74HC244, 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC

Input levels:
For 74HC244: CMOS level
For 74HCT244: TTL level
Octal bus interface
Non-inverting 3-state outputs
Complies with JEDEC standard no. 7 A
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from 40 Cto +85 C and 40 Cto +125 C

Specifications
Attribute Value
Logic Family 74HC
Logic Function CMOS
Number of Channels per Chip 10
Input Type Single Ended
Output Type 3 State
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 20
Maximum High Level Output Current +7.8mA
Maximum Low Level Output Current -7.8mA
Maximum Propagation Delay Time @ Maximum CL 165 ns @ 15 pF
Dimensions 13 x 7.6 x 2.45mm
Height 2.45mm
Maximum Operating Temperature +125 °C
Propagation Delay Test Condition 15pF
Length 13mm
Maximum Operating Supply Voltage 6 V
Width 7.6mm
Minimum Operating Supply Voltage 2 V
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch when stock is available
Price Each (On a Reel of 2000)
SGD 0.229
(exc. GST)
SGD 0.245
(inc. GST)
units
Per unit
Per Reel*
2000 - 2000
SGD0.229
SGD458.00
4000 - 4000
SGD0.213
SGD426.00
6000 +
SGD0.20
SGD400.00
*price indicative
Related Products
Reduce switching noise of input gain control, mute, ...
Description:
Reduce switching noise of input gain control, mute, main volume, fader volume, bass, middle, treble, loudness, by using advanced switch circuit [Possible to control all steps]Built-in ground isolation amplifier inputs, ideal for external stereo inputBuilt-in differential input selector that can ...
This series supports common control software, increasing design ...
Description:
This series supports common control software, increasing design and development efficiency. Tone quality can be adjusted by parametric equalizer using no external components. The built-in three-band equalizer sub woofer output allows for a space saving design. Reduce switching noise of ...
Description:
The SY89545L is a fast, low jitter 4:1 differential MUX with an LVDS (350mV) compatible output with guaranteed data rate throughput of 3.2Gbps over temperature and voltage. The SY89545L differential inputs include a unique, 3-pin internal termination that allows access ...
I²C Host Interface, Supports 100kHz and 400kHz I²C ...
Description:
I²C Host Interface, Supports 100kHz and 400kHz I²C Communication Speeds 1-Wire Master I/O with Selectable Active or Passive 1-Wire Pullup Provides Reset/Presence, 8-Bit, Single-Bit, and Three-Bit 1-Wire I/O Sequences Eight Channels of Independently Operated 1-Wire I/O Standard and Overdrive 1-Wire ...