Cooper Bussmann, 325A, FF, British Standard Fuse, gR, 350 V ac, 660 V ac

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

GEC Fuses BS88, Type GS

Semiconductor fuse links have a precise pre-determined performance which ensures a low arc voltage and minimum let through current. Semiconductor fuses are suited to application in the field of traction, distribution of power, motor drives and in process industries.

Melt Point Curve Class IEC 269-4
ASTA Certified

Note

In the table below, I2t is the pre-arcing value; I2t Total is the clearing value at 240Vac

Specifications
Attribute Value
Current Rating 325 A
Fuse Standard BS 88
Fixing Centres 81.7mm
Application Category GR
Tag Width 25.4mm
Fuse Speed FF
High Rupture Capacity Yes
Overall Length 107mm
Body Diameter 34.6mm
Body Height 55mm
Temporarily out of stock - back order for despatch when stock is available
Price Each
SGD 221.79
(exc. GST)
SGD 237.32
(inc. GST)
units
Per unit
1 - 9
SGD221.79
10 - 49
SGD195.40
50 - 99
SGD183.17
100 - 249
SGD174.97
250 +
SGD167.46
Related Products
Cooper Bussman's bolted tag fuse is essentially a ...
Description:
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They ...
Cooper Bussman's bolted tag fuse is essentially a ...
Description:
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They ...
Semiconductor fuse links have a precise pre-determined performance ...
Description:
Semiconductor fuse links have a precise pre-determined performance which ensures a low arc voltage and minimum let through current. Semiconductor fuses are suited to application in the field of traction, distribution of power, motor drives and in process industries. Melt ...
As the fuse allows for the starting surge ...
Description:
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A. Breaking capacity ...