ON Semi NSVF3007SG3T1G NPN Transistor, 30 mA, 12 V, 3-Pin MCPH

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

This RF transistor is designed for low noise amplifier applications. MCPH package is suitable for use under high temperature environment because it has superior heat radiation characteristics. This RF transistor is PPAP capable for automotive applications.

Low-noise use : NF = 1.2 dB (typ) [f = 1 GHz]
Realize the clear signal amplification
High cut-off frequency : fT = 8 GHz (typ) [VCE = 5 V]
Available for high frequency application
High gain : |S21e|2 = 12 dB (typ) [f = 1 GHz]
Useful for the reception of the small signal
PPAP capable
Suitable for automotive application
MCPH3 package is pin-compatible with SC-70FL
Reduce PCB mount area
Pb-Free and Halogen Free
Environmental consideration
Low current operating
Useful for long lifetime of the battery
Low Noise Amplifier
RF Amplifier
FM Radio Antenna
Remote Keyless Entry System (RKE)

Attribute Value
Transistor Type NPN
Maximum DC Collector Current 30 mA
Maximum Collector Emitter Voltage 12 V
Package Type MCPH
Mounting Type Surface Mount
Maximum Power Dissipation 350 mW
Minimum DC Current Gain 60
Transistor Configuration Single
Maximum Collector Base Voltage 20 V
Maximum Emitter Base Voltage 2 V
Maximum Operating Frequency 8 GHz
Pin Count 3
Number of Elements per Chip 1
Minimum Operating Temperature -55 °C
Automotive Standard AEC-Q101
Height 0.85mm
Dimensions 2 x 1.6 x 0.85mm
Maximum Operating Temperature +150 °C
Length 2mm
Width 1.6mm
3000 In stock for delivery within 3 working days
Price Each (In a Pack of 50)
SGD 0.467
(exc. GST)
SGD 0.50
(inc. GST)
Per unit
Per Pack*
50 - 200
250 - 450
500 - 950
1000 - 1450
1500 +
*price indicative
Packaging Options:
Related Products
VEML6070 is an advanced ultraviolet (UV) light sensor ...
VEML6070 is an advanced ultraviolet (UV) light sensor with I 2C protocol interface and designed by the CMOS process. It is easily operated via a simple I2C command. The active acknowledge (ACK) feature with threshold windows setting allows the UV ...
Brought to you by RS Pro, these LED ...
Brought to you by RS Pro, these LED indicators are single chip and feature a simple lead pin connection for easy installation. Providing a good level of brightness over a long service life, these T1 sized LED indicators are suitable ...
VCC 430xH series are high efficiency T1-3/4 (5mm) ...
VCC 430xH series are high efficiency T1-3/4 (5mm) through-hole LEDs providing a high intensity light output. Diffused lens types have a wide viewing angle. LEDs from the 4302H series contain an integral current limiting resistor allowing direct operation from 5V ...
The BM3R 50Hz module has been designed to ...
The BM3R 50Hz module has been designed to offer all 3-Phases switched Burst Firing of a thyristor assembly or complete thyristor controllers for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing ...