Separate 3 digit 14mm voltage and current meters
Constant voltage or constant current operation
New safety terminals accept fixed shroud 4mm plugs plus forks and wires
DC output switch enables voltage/current setup with load disconnected
Low ripple and noise
Supplied with mains lead and instructions
Technical specification | |
Main Outputs | |
Operating modes: | Constant voltage or constant current with automatic crossover |
Load regulation: | <0.01% of max. o/p for a 90% change |
Line regulation: | <0.01% of max o/p for a 10% change |
Ripple and noise: | Typically <1mV rms, CV mode |
Status indication: | Output ON lamps. Constant current mode lamps |
Output switches: | Electronic. Preset voltage and current displayed when output is off |
General | |
Output protection: | Protected against short circuits, forward voltages or reverse currents |
Dimensions: | W.160 H.140 D.295mm |
Weight: | 3.4kg (EL301), 4.4kg (EL183/302/561), 5kg (EL155/EL303) |
Attribute | Value |
---|---|
Output Voltage | 0 → 30V |
Output Current | 0 → 3A |
Number of Outputs | 1 |
Type | Digital |
Power Rating | 90W |
Supply Voltage | 115 V ac, 230 V ac |
Number of Displays | 2 |
Input Connector | IEC 320 |
Output Connector | Binding Post Terminal |
Minimum Temperature | +5°C |
Maximum Temperature | +40°C |