Aim-TTi Digital Bench Power Supply 420W, 1 Output 0 → 42V 0 → 10A

  • RS Stock No. 437-9007
  • Mfr. Part No. EX4210R
  • Manufacturer Aim-TTi
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

EX-R Series Single, Dual and Triple Output PSUs

The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.

Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)

EX Series: EX355P

Opto-isolated RS-232 interface
Front panel controls can be locked out

The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.

EX752M Digital Multi-mode Dual Output PSU

Separate voltage and current meters for each output
Safety output terminals

EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT

Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A

Approvals

EN61010-1 (Safety) and EN61326 (EMC)

Supplied with

user manual and mains lead

Specifications
Attribute Value
Output Voltage 0 → 42V
Output Current 0 → 10A
Number of Outputs 1
Type Digital
Power Rating 420W
Supply Voltage 115 V ac, 230 V ac
Number of Displays 2
Input Connector IEC 320
Output Connector Binding Post Terminal
Minimum Temperature +5°C
Maximum Temperature +40°C
12 In stock for delivery within 3 working days
Price Each
SGD 977.85
(exc. GST)
SGD 1,046.30
(inc. GST)
units
Per unit
1 +
SGD977.85
Related Products
Single, dual or triple output modelsModels from 6V/8A ...
Description:
Single, dual or triple output modelsModels from 6V/8A up to 60V/1.5ALinear regulation - for the best performanceUltra-compact design - uses up less spaceTrue Analog controls - for ease of useS-Lock function - instantly lock settingsV-Span function - customise the voltage ...
ELC programmable power supply ALR3206D offers automatic constant ...
Description:
ELC programmable power supply ALR3206D offers automatic constant voltage and constant current operation. Its floating outputs are on 4 mm safety terminals in the front panel and on a spring terminal block on the rear panel. ALR3206D incorporates protection against ...
Multi-range power supply models BK9103 and BK9104 can ...
Description:
Multi-range power supply models BK9103 and BK9104 can replace several power supplies on your bench by offering extended operating areas. Unlike conventional supplies with fixed output ratings, these power supplies automatically recalculate voltage and current limits for each setting, providing ...
3 independent dc supply voltagesSeparate LED displays of ...
Description:
3 independent dc supply voltagesSeparate LED displays of voltage and current for each outputFloating outputs; parallel or serial operationAdjustable current limitOutputs via 4mm safety shrouded socketsTemperature-controlled fan115/230V ±10% 50-60Hz.