Aim-TTi Digital Bench Power Supply 300W, 2 Output 0 → 75V 2 A, 4 A

  • RS Stock No. 388-2726
  • Mfr. Part No. EX752M
  • Manufacturer Aim-TTi
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

EX-R Series Single, Dual and Triple Output PSUs

The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.

Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)

EX Series: EX355P

Opto-isolated RS-232 interface
Front panel controls can be locked out

The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.

EX752M Digital Multi-mode Dual Output PSU

Separate voltage and current meters for each output
Safety output terminals

EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT

Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A

Approvals

EN61010-1 (Safety) and EN61326 (EMC)

Supplied with

user manual and mains lead

Specifications
Attribute Value
Output Voltage 0 → 75V
Output Current 2 A, 4 A
Number of Outputs 2
Type Digital
Power Rating 300W
Supply Voltage 115 V ac, 230 V ac
Number of Displays 4
Input Connector IEC 320
Output Connector Binding Post Terminal
Minimum Temperature +5°C
Maximum Temperature +40°C
26 In stock for delivery within 3 working days
Price Each
SGD 1,109.05
(exc. GST)
SGD 1,186.68
(inc. GST)
units
Per unit
1 +
SGD1,109.05
Related Products
Single, dual or triple output modelsModels from 6V/8A ...
Description:
Single, dual or triple output modelsModels from 6V/8A up to 60V/1.5ALinear regulation - for the best performanceUltra-compact design - uses up less spaceTrue Analog controls - for ease of useS-Lock function - instantly lock settingsV-Span function - customise the voltage ...
Still just as robust as before, these up-to-date ...
Description:
Still just as robust as before, these up-to-date models are lighter and cheaper.3-digit digital display, red current LEDs and green voltage LEDs (channels 1 and 2).Linear technology: stability, low noise.Fine and coarse adjustment (channels 1 and 2).Electronic protection against short-circuits, ...
Outputs via safety jacksOperation in either AC or ...
Description:
Outputs via safety jacksOperation in either AC or DC modeAC and DC outputs galvanically isolated from power supplyDigital displays for voltage and current (3-digit)Integrated stabilised DC laboratory power supply (on EA-3051B)Thermal protection switch (on EA-3050B).
Very short adjustment periodIntegrated sequence function to generate ...
Description:
Very short adjustment periodIntegrated sequence function to generate voltage and current flowsAuto-ranging outputFront and rear output terminalsAddressable RS232 interface / analogue interfaceIEEE488 interface can be integrated as an optionMounting kit 1 for mounting a device in a 19" rackMounting kit ...