BD27400GUL-E2 ROHM, Speaker Amplifier 30kHz, 9-Pin WL-CSP Mono

  • RS Stock No. 171-6235
  • Mfr. Part No. BD27400GUL-E2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BD27400GUL is a low voltage drive class-D monaural speaker amplifier that was developed for cellular telephones,mobile audio products and the others.
The LC filter of the speaker output is unnecessary and the external part can compose a speaker amplifier at three. Because the efficiency is high and is low consumption power with the class-D operation, it is the optimal for the application of the battery drive. Also Current consumption of 0μA when standby and fast transitions from standby to active with little pop noise make it is suitable for applications that switch repeatedly between suspended and active.

High output power 2.5W typ.(VDD=5V,RL=4Ω,THD+N=10%,BTL)
Very small package 9-Pin WL-CSP (1.5*1.5*0.55mmMAX)
Gain selectable by external resistor
LC Filter less
Stand by function
Protection circuitry (Short protection, Thermal shutdown, Under voltage lockout)
Analogue differential input / PWM digital output
Pop noise suppression circuitry

Specifications
Attribute Value
Output Type 1 Channel Mono
Maximum Power 2.5W
Amplifier Class Class D
Mounting Type Surface Mount
Typical Single Supply Voltage 2.5 → 5.5 V
Power Supply Type Single
Number of Channels per Chip 1
Package Type WL-CSP
Pin Count 9
Input Signal Type Differential
Output Signal Type Differential
Typical Gain Bandwidth Product 30kHz
Minimum CMRR 55dB
Maximum Operating Temperature +85 °C
Dimensions 1.5 x 1.5 x 0.45mm
Length 1.5mm
Height 0.45mm
Minimum Operating Temperature -40 °C
Width 1.5mm
30 In stock for delivery within 3 working days
Price Each (In a Pack of 10)
SGD 0.833
(exc. GST)
SGD 0.891
(inc. GST)
units
Per unit
Per Pack*
10 - 90
SGD0.833
SGD8.33
100 - 240
SGD0.749
SGD7.49
250 - 490
SGD0.682
SGD6.82
500 - 990
SGD0.624
SGD6.24
1000 +
SGD0.577
SGD5.77
*price indicative
Packaging Options:
Related Products
Protected Digital Audio Driver with Floating PWM input ...
Description:
Protected Digital Audio Driver with Floating PWM input in a 16-Lead SOIC Narrow Package. Benefits:Floating PWM input enables easy half bridge implementationProgrammable bidirectional over-current protection with self-reset functionProgrammable preset dead-time for improved THD performancesHigh noise immunity+ - ...
Comparator ICs from ROHM meet all types, such ...
Description:
Comparator ICs from ROHM meet all types, such as bipolar, CMOS, ground sense (single supply), dual supply, high-voltage resistance, low noise, low saturation, low current consumption, and input/output full swing.
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, ...
Description:
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, T-, S-, R-, and E-Type0.25°C ResolutionDetects Thermocouple Shorts to GND or VCCDetects Open ThermocoupleInterfaces with simple SPI-Compatible Serial Interface (Read-Only) to Microcontrollers.
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...