- RS Stock No.:
- 870-4671
- Mfr. Part No.:
- PEG130KH4200QL1
- Manufacturer:
- KEMET
Discontinued product
- RS Stock No.:
- 870-4671
- Mfr. Part No.:
- PEG130KH4200QL1
- Manufacturer:
- KEMET
Technical data sheets
Legislation and Compliance
Product Details
Kemet PEG130 Series
Kemet PEG130 series electrolytic capacitors with outstanding electrical performance. The PEG130 series is constructed in a polarized, all-welded design with tinned copper wire leads and the negative pole connected to the case of the capacitor. The PEG130 winding is housed in a cylindrical aluminium can with a high purity aluminium lid and a high quality rubber gasket. The low ESR is a result of a low resistive electrolyte/paper system and an all-welded design.
High performance
Very long operational life
Minimal heat generation
Low ESR
Polarised all-welded design
Outstanding electrical performance
Very long operational life
Minimal heat generation
Low ESR
Polarised all-welded design
Outstanding electrical performance
Specifications
Attribute | Value |
---|---|
Capacitance | 2000µF |
Voltage | 40V dc |
Mounting Type | Through Hole |
Technology | Electrolytic |
Dimensions | 20 x 29mm |
Length | 29mm |
Minimum Operating Temperature | -40°C |
Diameter | 20mm |
Maximum Operating Temperature | +105°C |
Lifetime | 37000 h @ +105 °C/Ir |
Tolerance | -10 → +30% |
Leakage Current | 244 μA |
Ripple Current | 1.44 (A @100 Hz 105°C), 2.6 (A @= 5 kHz 105°C), 4 (A @= 5 kHz 100°C), 7.2 (A @= 5 kHz 80°C), 8.8 (A @= 5 kHz 60°C) |
Polarised | Polar |
Series | PEG130 |
Equivalent Series Resistance | 17 mΩ @ 5 → 100 kHz (105°C), 32 mΩ @ 100 kHz (20°C) |