SCA3300-D01-1 Murata, 3-Axis Accelerometer, SPI, 12-Pin DFL/SMD

  • RS Stock No. 144-6539
  • Mfr. Part No. SCA3300-D01-1
  • Manufacturer Murata
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FI
Product Details

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata

Specifications
Attribute Value
Sensor Type Accelerometer
Number of Axis 3
Technology Capaitive 3D MEMS
Mounting Type Surface Mount
Interface Type SPI
Maximum Frequency Response 88Hz
Minimum Frequency Response 10Hz
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 3 V
Package Type DFL/SMD
Sensitivity 1350 LSB/g, 2700 LSB/g, 5400 LSB/g
Pin Count 12
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
100 In stock for delivery within 3 working days
Price Each (On a Reel of 100)
SGD 43.83
(exc. GST)
SGD 46.90
(inc. GST)
units
Per unit
Per Reel*
100 - 100
SGD43.83
SGD4,383.00
200 +
SGD42.658
SGD4,265.80
*price indicative
Related Products
MEMS accelerometers have 3-axes (X, Y, Z) to ...
Description:
MEMS accelerometers have 3-axes (X, Y, Z) to detect changes in force resulting from fall, tilt, motion, positioning, shock and vibration. Fast response timeHigh sensitivityLow current consumptionLow voltage operationStandby modeSmall profile package.
The Microchip MM7150 Motion Sensor Module is a ...
Description:
The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip’s SSC7150 ...
MEMS accelerometers have 1-axes to detect changes in ...
Description:
MEMS accelerometers have 1-axes to detect changes in force resulting from fall, tilt, motion, positioning, shock and vibration. Fast response timeHigh sensitivityLow current consumptionLow voltage operationStandby modeSmall profile package.
ST Microelectronics 3-axis gyroscopes have a single sensing ...
Description:
ST Microelectronics 3-axis gyroscopes have a single sensing structure to measure motion along all three orthogonal axes rather than three separate structures. This reduces interference between the axes to increase accuracy and reliability.Measuring a wide range of angular acceleration, from ...