FTDI Chip Plug In Power Supply 9V dc, 1A, 1 Output, 2-Pin Type C - EuroPlug

  • RS Stock No. 720-3739
  • Mfr. Part No. VNCLO-PSU-EU
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Vinco Development Module

The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and supports connectivity to a wide range of application boards developed by the Arduino open-source community. These include Ethernet, motor control, LCD and many others.

Microcontroller: VNC2-64Q, Variable clock speed: 12/24/48MHz
Flash memory: 256KB, RAM: 16KB
Operating voltage: +5V, Input power supply: +9V
Digital I/O: 30, Analogue I/O: 8
USB port: 2 – configurable for host or device operation
Superset of the Arduino Duemilanove / Uno development boards
FTDI Integrated Development Environment (IDE) including code editor, compiler, assembler and debugger, supplied free of charge and supporting ANSI C coding for easy portability and maintainability
Precompiled drivers for a variety of interfaces e.g. USB, UART, SPI
Precompiled driver support for a wide range of USB host classes including Mass Storage, Human Interface Devices (keyboards, mice), audio devices, video devices (webcam) with many more under development
Compatible with existing Arduino shields
A software configuration wizard is currently under development

Note

The description above applies to the Vinco Development Platform RS 720-3723 only, information may not apply to accessories and power supplies

Specifications
Attribute Value
Plug Type 2-Pin Type C - EuroPlug
Output Voltage 9 V dc
Output Current 1A
Number of Outputs 1
212 In stock for delivery within 3 working days
Price Each
SGD 15.23
(exc. GST)
SGD 16.30
(inc. GST)
units
Per unit
1 +
SGD15.23
Related Products
Plug-in power supplies outputting a fixed, non-stabilised DC ...
Description:
Plug-in power supplies outputting a fixed, non-stabilised DC voltage.Standard version supplied with a bridge rectifier and a capacitor.Supplied with an approx. 1.7 m connector lead and an output connector with an internal diameter of 2.1 mm and an external diameter ...
The recommended power supply unit (PSU) for the ...
Description:
The recommended power supply unit (PSU) for the Raspberry Pi 3. This mains power supply has a 1.5m cable and micro USB plug. • Short circuit, overcurrent and over-voltage protection• Low standby current consumption.
Manufacture:In accordance with EN 60742 (electrical safety standard ...
Description:
Manufacture:In accordance with EN 60742 (electrical safety standard for models 8310; 8510; 8610); HD 19556 (8710) and EN 60950 for models 8610 and 8710. AC / AC transformers, available in power ratings of 3.5 VA; 8.5 VA; 10.5 VA; 15 ...
Plugs directly into a standard 3-pin 13A mains ...
Description:
Plugs directly into a standard 3-pin 13A mains socket2m (approx) output lead with polarity inverterDouble bobbin transformer - 4kV primary/secondary isolationThermal safety overload fuse embedded into primary winding230Vac ±10% 50/60Hz inputOperating temperature -10 to +40°C.