MPRLS0025PA00001A, Absolute Pressure Sensor, 25kPa 3 → 3.6 V Output, 12-Pin SMT

  • RS Stock No. 150-3949
  • Mfr. Part No. MPRLS0025PA00001A
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Honeywell MPR Series Pressure Sensors

The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices and commercial appliance applications.

Very small form factor: Enables portability by addressing weight, size, and space restrictions; easy to design in; occupies less area on the PCB.
Wide pressure ranges simplify use.
Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors.
Value Solution: Cost-effective, high volume solution with configurable options.
Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements: Allows avoidance of thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated sensors may incur; allows unlimited floor life when stored as specified (simplifying storage and reducing scrap); eliminates lengthy bakes prior to reflow, and allows for lean manufacturing due to stability and usability shortly after reflow.
Low power/energy efficient: Reduces system power requirements and enables extended battery life.

Pressure Sensors, Honeywell

Attribute Value
Maximum Overload Pressure 60psi
Mounting Type Surface Mount
Package Type SMT
Pin Count 12
Dimensions 5 x 5 x 5.8mm
Length 5mm
Width 5mm
Height 5.8mm
Maximum Operating Pressure 25kPa
Maximum Operating Supply Voltage 3.3 V
Maximum Operating Temperature +85 °C
Maximum Output Voltage 3.6 V
Minimum Operating Pressure 0kPa
Output Voltage Range 3 → 3.6 V
Operating Pressure Range 0 → 25 psi
Operating Supply Voltage Range 3 → 3.6 V dc
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 3 V dc
Operating Temperature Range -40 → +85 °C
Minimum Output Voltage 3 V
Temporarily out of stock - back order for despatch when stock is available
Price Each (On a Reel of 700)
SGD 6.90
(exc. GST)
SGD 7.38
(inc. GST)
Per unit
Per Reel*
700 +
*price indicative
Related Products
Pressure sensor types that can be used to ...
Pressure sensor types that can be used to support vehicles and industrial equipment utilising alternative fuels such as Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG).
TE Connectivity’s MEAS MS5803/MS5805 series of pressure sensor ...
TE Connectivity’s MEAS MS5803/MS5805 series of pressure sensor modules combine an ultra-low power 24-bit ΔΣ ADC with internal factory calibrated coefficients and a high linearity pressure sensor. These altimeters enable users to optimise for current consumption and conversion speed whilst ...
This TE Connectivity MEAS MS54XX Series of piezoresistive ...
This TE Connectivity MEAS MS54XX Series of piezoresistive pressure sensors provide an output voltage directly proportional to the amount of pressure applied. These pressure sensors are constructed of a ceramic carrier with a mounted silicon micromachined pressure sensor die. Suitable ...
The BMP280 is an absolute barometric pressure sensor ...
The BMP280 is an absolute barometric pressure sensor especially designed for mobile applicationsThe measurement period consists of a temperature and pressure measurement with selectable oversamplingOperates in three power modes: sleep mode, normal mode, forced modeA set of oversampling settings is ...