Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 41 - 60 of 84 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material
RS Stock No. 124-8470
Mfr. Part No.TMSC-10
BrandSKF
SGD201.70
Each
units
- - Hand - Steel
RS Stock No. 125-3889
Mfr. Part No.1.06/1A1-B
BrandGedore
SGD134.97
Each
units
140 (External) mm, 180 (Internal) mm - Lever Press - -
RS Stock No. 300-6225
Mfr. Part No.U.301
BrandFacom
SGD115.22
Each
units
80 mm - Hand - -
RS Stock No. 125-3894
Mfr. Part No.1.06/31-B
BrandGedore
SGD415.37
Each
units
250 (External) mm, 340 (Internal) mm - Lever Press - -
RS Stock No. 669-8215
Mfr. Part No.U.306-180
BrandFacom
SGD381.88
Each
units
180 mm - Gear - -
RS Stock No. 845-8356
Mfr. Part No.TMMP 2X65
BrandSKF
SGD100.50
Each
units
65 mm 0.7t Lever Press - High Quality Carbon Steel
RS Stock No. 236-7658
Mfr. Part No.U.20
BrandFacom
SGD523.05
Each
units
170 mm - Gear - -
RS Stock No. 124-8442
Mfr. Part No.TMBS150E
BrandSKF
SGD1,343.49
Each
units
- - Hand 14 -
RS Stock No. 125-3890
Mfr. Part No.1.06/21-B
BrandGedore
SGD220.56
Each
units
170 (External) mm, 220 (Internal) mm - Lever Press - -
RS Stock No. 125-3883
Mfr. Part No.1.04/2A-B
BrandGedore
SGD286.09
Each
units
200 (External) mm, 260 (Internal) mm - Lever Press - -
RS Stock No. 124-8460
Mfr. Part No.TMMR250F
BrandSKF
SGD284.94
Each
units
254 mm - Hand - -
RS Stock No. 122-2297
Mfr. Part No.BHP3751G
BrandEnerpac
SGD10,194.65
Each
units
- 30t Hydraulic - -
RS Stock No. 300-6219
Mfr. Part No.U.14L
BrandFacom
SGD99.01
Each
units
45 mm - Hand - -
RS Stock No. 611-4098
Mfr. Part No.U.301M
BrandFacom
SGD253.44
Each
units
100 mm - Lever Press - -
RS Stock No. 845-8353
Mfr. Part No.TMMP 3X185
BrandSKF
SGD265.42
Each
units
185 mm 2.7t Hand - High Quality Carbon Steel
RS Stock No. 737-2829
Mfr. Part No.71140211
BrandSTAHLWILLE
SGD151.95
Each
units
150 mm - Gear - -
RS Stock No. 847-8230
Mfr. Part No.1656937
BrandGedore
SGD71.81
Each
units
80 mm - Lever Press - -
RS Stock No. 122-2295
Mfr. Part No.BHP1752
BrandEnerpac
SGD4,956.49
Each
units
- 8t Hydraulic - -
RS Stock No. 300-6269
Mfr. Part No.U.35L
BrandFacom
SGD283.57
Each
units
15 → 75 mm - Gear - -
RS Stock No. 300-6203
Mfr. Part No.U.14A
BrandFacom
SGD91.39
Each
units
35 mm - Hand - -
Related Products
The SKF TMBS E series of back pullers ...
Description:
The SKF TMBS E series of back pullers are easily inserted between the bearing and shoulder on the shaft. They have a spring loaded centre point allowing easier puller centring and a safety valve minimising puller overload. • TMBS 100E ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort. Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...
The TMSC series of internal bearing pullers provide ...
Description:
The TMSC series of internal bearing pullers provide a positive grip of the bearing by expanding the collet adapters on the rear side of the bearing bore. The adapters are connected to a slide hammer which generates enough impact to ...
4" 50-100mm spread6" 75-150mm spread8" 75-150mm spread10" 150-250mm ...
Description:
4" 50-100mm spread6" 75-150mm spread8" 75-150mm spread10" 150-250mm spread. 10 Ton hydraulic power easily pulls hubs, flanges, gears and bearings2//3 way cross-head and 3x3 position puller armsMaximum reach 160mmTypical pulling tasks:.