Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.

Where can a Bearing Puller be used?

One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:

Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.

Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.

Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.

Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.

How Bearing Pullers work

Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.

Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.
  • Reversible for internal or external uses
  • Two or three claw design
  • Spring loaded centre point

...
Read more Read less

Filters

Viewing 21 - 40 of 83 products
Results per page
Description Price Capacity Hydraulic Force Operation Number of Pieces Case Material
RS Stock No. 190-601
Mfr. Part No.TMHC 110 E
BrandSKF
SGD1,782.53
1 Kit
Kit(s)
- 11.2t Hydraulic - -
RS Stock No. 237-811
Mfr. Part No.GEDORE 1.06/ 2-E
BrandGedore
SGD274.18
Each
units
160 mm - Gear - -
RS Stock No. 124-8431
Mfr. Part No.TMHP10E
BrandSKF
SGD1,206.91
Each
units
- - Hydraulic 15 -
RS Stock No. 737-2835
Mfr. Part No.71050010
BrandSTAHLWILLE
SGD189.54
Each
units
22 mm - Hand - -
RS Stock No. 124-8446
Mfr. Part No.TMMA80
BrandSKF
SGD710.86
Each
units
200 mm - Lever Press - -
RS Stock No. 125-3882
Mfr. Part No.1.04/1A-B
BrandGedore
SGD186.40
Each
units
130 (External) mm, 170 (Internal) mm - Lever Press - -
RS Stock No. 124-8437
Mfr. Part No.TMIP30-60
BrandSKF
SGD1,038.80
Each
units
30 → 60 mm - Gear 2 -
RS Stock No. 308-0087
Mfr. Part No.U.306
BrandFacom
SGD359.19
Each
units
- - Gear - -
RS Stock No. 732-4788
Mfr. Part No.TMMA 75H
BrandSKF
SGD1,162.07
Each
units
- 8.4t Hydraulic - -
RS Stock No. 125-3887
Mfr. Part No.1.04/HP3A-B
BrandGedore
SGD679.44
Each
units
350 (External) mm, 420 (Internal) mm - Lever Press - -
RS Stock No. 236-7664
Mfr. Part No.U.20BPB
BrandFacom
SGD716.59
Each
units
260 mm - Gear - -
RS Stock No. 885-5322
Mfr. Part No.729101/400MPA
BrandSKF
SGD6,627.87
Each
units
200 cm³ 400MPa Hand - -
RS Stock No. 737-2822
Mfr. Part No.71160010
BrandSTAHLWILLE
SGD111.88
Each
units
12 mm - Gear - -
RS Stock No. 125-3885
Mfr. Part No.1.04/HP1A-B
BrandGedore
SGD232.22
Each
units
130 (External) mm, 170 (Internal) mm - Lever Press - -
RS Stock No. 300-6247
Mfr. Part No.U.35
BrandFacom
SGD243.93
Each
units
15 → 75 mm - Gear - -
RS Stock No. 847-8243
Mfr. Part No.1656996
BrandGedore
SGD76.08
Each
units
50 mm - Lever Press - -
RS Stock No. 237-827
Mfr. Part No.GEDORE 1.07/2-E
BrandGedore
SGD392.57
Each
units
160 mm - Lever Press - -
RS Stock No. 737-2826
Mfr. Part No.71161001
BrandSTAHLWILLE
SGD120.98
Each
units
- - Gear - -
RS Stock No. 236-7658
Mfr. Part No.U.20
BrandFacom
SGD556.47
Each
units
170 mm - Gear - -
RS Stock No. 124-8442
Mfr. Part No.TMBS150E
BrandSKF
SGD1,410.66
Each
units
- - Hand 14 -
Related Products
The SKF TMBS E series of back pullers ...
Description:
The SKF TMBS E series of back pullers are easily inserted between the bearing and shoulder on the shaft. They have a spring loaded centre point allowing easier puller centring and a safety valve minimising puller overload. • TMBS 100E ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort. Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...
The TMSC series of internal bearing pullers provide ...
Description:
The TMSC series of internal bearing pullers provide a positive grip of the bearing by expanding the collet adapters on the rear side of the bearing bore. The adapters are connected to a slide hammer which generates enough impact to ...
4" 50-100mm spread6" 75-150mm spread8" 75-150mm spread10" 150-250mm ...
Description:
4" 50-100mm spread6" 75-150mm spread8" 75-150mm spread10" 150-250mm spread. 10 Ton hydraulic power easily pulls hubs, flanges, gears and bearings2//3 way cross-head and 3x3 position puller armsMaximum reach 160mmTypical pulling tasks:.