Masonry & SDS Drill Bits

Filters

Viewing 1 - 20 of 130 products
Results per page
Description Price Diameter Overall Length Hammer Capable SDS Type Material Finish
RS Stock No. 349-9289
Mfr. Part No.2608833771
BrandBosch
SGD8.64
Each
units
5mm 110 mm Yes SDS-Plus - -
RS Stock No. 468-7550
Mfr. Part No.DT9602-QZ
BrandDeWALT
SGD31.12
Each
units
22mm 250 mm - SDS-Plus Hardened Steel Body; Carbide Tipped -
RS Stock No. 562-511
BrandRS PRO
SGD14.76
Each
units
16mm 210 mm Yes SDS-Plus Carbide Tipped Blackened
RS Stock No. 562-371
BrandRS PRO
SGD7.61
Each
units
12mm 160 mm Yes SDS Carbide Tipped Blackened
RS Stock No. 468-7544
Mfr. Part No.DT9581-QZ
BrandDeWALT
SGD16.52
Each
units
16mm 300 mm - SDS-Plus Hardened Steel Body; Carbide Tipped -
RS Stock No. 668-1015
BrandRS PRO
SGD6.26
1 Box of 5
Box(es)
8mm 120 mm Yes - Carbide Tipped Zinc Plated
RS Stock No. 349-9251
Mfr. Part No.1609200209
BrandBosch
SGD3.88
Each
units
8mm 120 mm Yes - Carbide Tipped Silver Gray
RS Stock No. 349-9346
Mfr. Part No.2608833789
BrandBosch
SGD7.21
Each
units
8mm 160 mm Yes SDS-Plus - -
RS Stock No. 362-1559
Mfr. Part No.DT6674-XJ
BrandDeWALT
SGD3.70
Each
units
5.5mm 85 mm - - Carbide Tipped Copper Brazing
RS Stock No. 349-9318
Mfr. Part No.2608833778
BrandBosch
SGD6.25
Each
units
6mm 160 mm Yes SDS-Plus - -
RS Stock No. 349-9217
Mfr. Part No.1609200207
BrandBosch
SGD3.56
Each
units
6mm 100 mm Yes - Carbide Tipped Silver Gray
RS Stock No. 300-9656
Mfr. Part No.1618600210
BrandBosch
SGD30.28
Each
units
- 304 mm - SDS-Max - -
RS Stock No. 215-136
BrandRS PRO
SGD2.93
Each
units
12mm 150 mm Yes - Carbide Tipped Zinc Plated
RS Stock No. 788-3809
Mfr. Part No.2608597403
BrandBosch
SGD60.38
Each
units
12mm 600 mm - SDS-Plus - -
RS Stock No. 562-505
BrandRS PRO
SGD38.98
Each
units
22mm 450 mm Yes SDS Carbide Tipped Blackened
RS Stock No. 562-444
BrandRS PRO
SGD17.41
Each
units
10mm 450 mm Yes SDS Carbide Tipped Blackened
RS Stock No. 562-375
BrandRS PRO
SGD3.19
Each
units
5mm 160 mm Yes SDS Carbide Tipped Blackened
RS Stock No. 469-1004
Mfr. Part No.DT9553-QZ
BrandDeWALT
SGD9.57
Each
units
12mm 200 mm - SDS-Plus Hardened Steel Body; Carbide Tipped -
RS Stock No. 562-498
BrandRS PRO
SGD3.11
Each
units
8mm 110 mm Yes SDS Carbide Tipped Blackened
RS Stock No. 468-8648
Mfr. Part No.DT9526-QZ
BrandDeWALT
SGD9.40
Each
units
7mm 210 mm - SDS-Plus Hardened Steel Body; Carbide Tipped -
Related Products
Allows full range of hole saws (14mm to ...
Description:
Allows full range of hole saws (14mm to 152mm) to be usedSDS bits for use with SDS chuck power toolsHexagon and plain shank arbors for use with three-jaw chuck power toolsRework adaptor, enables enlargement of an existing holeSet contains: One ...
This RS Pro SDS+ drill features carbide cutting ...
Description:
This RS Pro SDS+ drill features carbide cutting edges for sharp and accurate cutting into masonry. A centre tip for a precise drilling start and good guidance while drilling. The blackened finish adds heat treatment to reduce friction between the ...
• Hammer drill with TURBOKEIL centre point and ...
Description:
• Hammer drill with TURBOKEIL centre point and MS5 spirals• Chrome-nickel-molybdenum steel, shot-peened and austempered• Perfect spot-drilling and optimum drilling results, even in reinforced concrete• Optimum power transmission and controlled clearing of drilling dust• Suitable for all ...
Introducing the professional range of SDS Plus Drill ...
Description:
Introducing the professional range of SDS Plus Drill Bits from DeWALT, who are leading the way as some of the best drill bits in terms of speed, bit life, and durability. The unique design features an optimised flute design, allowing ...