Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.

Types of Countersink Cutters
  1. Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay on centre.
  2. Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.
    • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for using in small holes for general purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.
    • Three fluted: These are designed for a chatter free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centering ability.
    • Four fluted: These have good radial relief
    • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter
    • Six fluted: These are ideal for producing fast shearing cuts

Materials
These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.

...
Read more Read less

Filters

Viewing 1 - 20 of 89 products
Results per page
Description Price Head Diameter Countersink Angle Number of Flutes Material Overall Length Shank Diameter Shank Length
RS Stock No. 218-573
BrandRS PRO
SGD25.53
Each
units
20mm 90° 5 HSS - - -
RS Stock No. 673-8691
BrandRS PRO
SGD10.54
Each
units
6.3mm 90° 3 HSS 45 mm 5 mm 35mm
RS Stock No. 218-595
BrandRS PRO
SGD14.15
Each
units
12mm 90° 5 HSS - - -
RS Stock No. 218-602
BrandRS PRO
SGD12.66
Each
units
8mm 90° 5 HSS - - -
RS Stock No. 673-8717
BrandRS PRO
SGD23.30
Each
units
16.5mm 90° 3 HSS 63 mm 10 mm 42mm
RS Stock No. 456-898
BrandRS PRO
SGD33.00
Each
units
12mm - 3 HSS 120 mm - -
RS Stock No. 218-630
BrandRS PRO
SGD37.63
Each
units
20mm 90° 3 HSS - - -
RS Stock No. 562-634
BrandRS PRO
SGD10.31
Each
units
6mm 90° 5 HSS 45 mm 5 mm 35mm
RS Stock No. 215-473
BrandRS PRO
SGD14.37
Each
units
5mm 90° - HSS 45 mm 6 mm 45mm
RS Stock No. 423-826
BrandRS PRO
SGD22.50
Each
units
16.5mm 90° 3 HSS 40 mm 7.15 mm 21.5mm
RS Stock No. 218-551
BrandRS PRO
SGD11.49
Each
units
6mm 90° 3 HSS - - -
RS Stock No. 673-8708
BrandRS PRO
SGD13.51
Each
units
12.4mm 90° 3 HSS 56 mm 8 mm 41mm
RS Stock No. 218-668
BrandRS PRO
SGD16.60
Each
units
10mm 90° 3 HSS - - -
RS Stock No. 218-674
BrandRS PRO
SGD14.84
Each
units
8mm 90° 3 HSS - - -
RS Stock No. 673-8701
BrandRS PRO
SGD11.46
Each
units
8.3mm 90° 3 HSS 50 mm 6 mm 38mm
RS Stock No. 423-872
BrandRS PRO
SGD14.56
Each
units
8.3mm 90° 3 HSS 32 mm 7.15 mm 21.5mm
RS Stock No. 562-533
BrandRS PRO
SGD17.02
Each
units
10mm 90° 3 HSS 39 mm 6.35 mm 20.5mm
RS Stock No. 423-850
BrandRS PRO
SGD32.71
Each
units
21mm 90° - HSS 65 mm 7.15 mm 20mm
RS Stock No. 456-905
BrandRS PRO
SGD46.49
Each
units
25mm 90° 3 HSS 145 mm - -
RS Stock No. 423-838
BrandRS PRO
SGD18.88
Each
units
15.3mm 90° 5 HSS 32 mm 7.15 mm 21.5mm
Related Products
90° flutes for use with machines and portable ...
Description:
90° flutes for use with machines and portable toolsThree-flute designed to reduce clogging, improve clearance and be chatter freeThree-flute for use on metals onlyFive-flute for use on metal and wood.
HSS-E countersink with cylinder shaftFor rust-free steels and ...
Description:
HSS-E countersink with cylinder shaftFor rust-free steels and + VA materialsThree cutters with radial rear vent for vibration-free workFor deburring, threading and weighting as per DIN 74.
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...
Precision ground, HSS power tool accessories with 1/4" ...
Description:
Precision ground, HSS power tool accessories with 1/4" hexagon shanksExcellent non-slip characteristics when used in three-jaw chucks.