Punch Sets

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metal working, a set of punch tools allows the operator to drive objects into the material, or form an impression on a work piece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.The RS range of punch sets includes several different types to suit your needs.Centre PunchA common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.Drift PunchSometimes referred to as a pokey, this punch tool is often used for enlarging preciously made holes. It can also be used for aligning holes prior to bolting.Parallel Pin PunchA parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.Spring Pin PunchSpring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches, and are specially shaped to remove roll pins without causing damage or becoming jammed. Wad PunchWad punches have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.Anti-VibrationWith shock absorbing rubber handle, this punch not only offers the user maximum safety and comfort, but also prevents clipping.

...
Read more Read less

Filters

Viewing 1 - 20 of 52 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 505-8688
BrandRS PRO
SGD41.38
Each
units
150 mm - 6 - Parallel Pin
RS Stock No. 541-7223
BrandRS PRO
SGD59.60
Each
units
- - 10 - Wad
RS Stock No. 423-2627
BrandRS PRO
SGD18.69
1 Set
Set(s)
4 in - 3 - -
RS Stock No. 626-1497
BrandRS PRO
SGD51.31
Each
units
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 6 - Drift
RS Stock No. 600-896
BrandRS PRO
SGD50.36
1 Set
Set(s)
47 mm, 57 mm, 67 mm - 6 - Spring Pin
RS Stock No. 381-4896
BrandRS PRO
SGD36.54
1 Set
Set(s)
4 in - 5 - Centre
RS Stock No. 381-4903
BrandRS PRO
SGD60.32
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS Stock No. 701-0568
BrandRS PRO
SGD65.22
1 Set
Set(s)
Flat Chisel: 125; Cross Head Chisel: 125; Rivet Punch (x2): 120; Centre Punch: 125 mm 10 mm 5 - Anti-Vibration
RS Stock No. 456-3634
BrandRS PRO
SGD40.42
1 Set
Set(s)
Flat Cold Chisel: 150; Flat Cold Chisel: 125; Crosscut chisel: 125 mm Centre Punch: 4; Taper Punch: 3; Taper Punch: 4 mm 6 - -
RS Stock No. 875-4758
BrandRS PRO
SGD21.54
Each
units
105 mm - 3 - -
RS Stock No. 381-4919
BrandRS PRO
SGD53.73
1 Set
Set(s)
205 mm 3.2 mm, 4.8 mm, 6.3 mm, 8 mm, 9.5 mm 5 - Parallel Pin
RS Stock No. 456-3640
BrandRS PRO
SGD40.93
Each
units
150 mm - 6 - Parallel Pin
RS Stock No. 875-4752
BrandRS PRO
SGD30.91
Each
units
105 mm - 5 - Centre
RS Stock No. 875-4764
BrandRS PRO
SGD45.83
Each
units
105 mm 1/16 in, 1/4 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS Stock No. 875-4761
BrandRS PRO
SGD37.21
Each
units
205 mm 5 mm, 6 mm, 8 mm, 9.5 mm 5 - Parallel Pin
RS Stock No. 701-0562
BrandRS PRO
SGD56.55
1 Set
Set(s)
120 mm 10 mm 5 - Drift
RS Stock No. 484-748
BrandRS PRO
SGD66.08
1 Set
Set(s)
150 mm - 5 - Parallel Pin
RS Stock No. 220-0662
Mfr. Part No.249.GPB
BrandFacom
SGD92.95
1 Set
Set(s)
55 mm - 5 - Anti-Vibration
RS Stock No. 494-076
Mfr. Part No.4-18-299
BrandStanley
SGD64.09
Each
units
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm - 12 - -
RS Stock No. 125-3901
Mfr. Part No.316D
BrandGedore
SGD42.21
Each
units
- 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm 6 - Parallel Pin
Related Products
A set of 100 alpha-numeric characters (3 mm ...
Description:
A set of 100 alpha-numeric characters (3 mm height) made from high quality hardened tool steel (characters hardened to 58-62 Rockwell C) to give clear, consistent marking throughout a long life. The set includes 12 blanks which may be used ...
From RS PRO this 8mm 27-piece hand engraving ...
Description:
From RS PRO this 8mm 27-piece hand engraving punch set for all your permanent identification marking for use on all metal objects. Hand punches for permanent identification markingHardened and tempered to give long life and maximum securityCapable of indenting material ...
Hand punches for permanent identification markingHardened and tempered ...
Description:
Hand punches for permanent identification markingHardened and tempered to give long life and maximum securityCapable of indenting material up to 40 Rockwell C hardnessSupplied in sturdy plastic boxes.
Since 1907 Proto® punchs and chisels are made ...
Description:
Since 1907 Proto® punchs and chisels are made from tough alloy steel and offer the Professional Advantage you need for top quality craftsmanship. Proto® punches and chisels are hardened quenched and tempered to precise specifications for durable hard tips and ...