Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 1 - 20 of 170 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 243-2998
    BrandRS PRO
    SGD24.53
    Each
    units
    Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 10A 1000V CAT III 1000 V - - CAT III
    RS Stock No. 726-3624
    Mfr. Part No.TL75-1
    BrandFluke
    SGD48.30
    Each
    units
    Test Lead Kit - Banana Plug - 1.22m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 726-3615
    Mfr. Part No.TL71-1
    BrandFluke
    SGD54.64
    Each
    units
    Test Lead Kit - Right Angle - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 705-1276
    Mfr. Part No.TL175E
    BrandFluke
    SGD61.00
    Each
    units
    Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 468-7415
    Mfr. Part No.TL76
    BrandFluke
    SGD69.00
    Each
    units
    Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 741-4358
    Mfr. Part No.TL175
    BrandFluke
    SGD61.00
    Each
    units
    Test Lead Kit - Shrouded - - 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V -20°C +55°C CAT III, CAT IV
    RS Stock No. 161-6511
    BrandRS PRO
    SGD19.97
    Each
    units
    Test Lead - Crocodile Clip - 500mm - - - - - -
    RS Stock No. 412-119
    Mfr. Part No.FLUKE TLK287
    BrandFluke
    SGD288.00
    Each
    units
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 2 A, 5 A, 10 A 300 V, 1000 V CAT II 300 V, CAT III 1000 V - - CAT II, CAT III
    RS Stock No. 412-129
    Mfr. Part No.FLUKE TLK289 EUR
    BrandFluke
    SGD288.00
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - 1.5m 3 A, 10 A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 436-866
    Mfr. Part No.TLK289
    BrandFluke
    SGD288.00
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - -
    RS Stock No. 726-3633
    Mfr. Part No.TL220-1
    BrandFluke
    SGD142.28
    Each
    units
    Industrial Test Lead Kit - Crocodile Clip, Right Angle to Right Angle - 1.6m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 764-8696
    Mfr. Part No.34133A
    SGD53.66
    Each
    units
    Right Angle Plug - Pogo Pin - 1.2m 3A - CAT II - - -
    RS Stock No. 493-3285
    Mfr. Part No.TP88
    BrandFluke
    SGD43.00
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - -
    RS Stock No. 731-5277
    BrandRS PRO
    SGD64.47
    Each
    units
    Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m - 600V CAT III 600 V -20°C +70°C CAT III
    RS Stock No. 324-5975
    Mfr. Part No.TL81A
    BrandFluke
    SGD272.00
    Each
    units
    Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 3 A, 5 A, 10 A 300V CAT II 300 V - - CAT II
    RS Stock No. 450-2358
    Mfr. Part No.TL224
    BrandFluke
    SGD57.00
    Each
    units
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 468-7358
    Mfr. Part No.L215
    BrandFluke
    SGD192.00
    Each
    units
    SureGrip Kit with Probe Light & Extender - - - - - - - - - -
    RS Stock No. 705-1285
    Mfr. Part No.TP175E
    BrandFluke
    SGD52.00
    Each
    units
    Test Probe - Lantern - - 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V -20°C +55°C CAT II, CAT III
    RS Stock No. 692-7147
    Mfr. Part No.11059A
    SGD252.24
    Each
    units
    Kelvin Probe Set - Banana Plug - 800mm - - - - - -
    RS Stock No. 360-0300
    Mfr. Part No.TT-HVP40
    BrandTestec
    SGD148.86
    Each
    units
    High Voltage Probe - Crocodile Clip, Plug - 1m - 40000V CAT I 0°C +50°C CAT I
    Related Products
    Test lead kit ideal for designing and checking ...
    Description:
    Test lead kit ideal for designing and checking electronic circuits.Precision electronic probes supplied with several crimped spring-loaded probe tips for maximum contact with SMD circuit test points.Test leads with micro-wire grips for fine SMD test.Mini crocodile clips, wire grips and ...
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of ...
    Multi-head test lead set with 4 probe profiles ...
    Description:
    Multi-head test lead set with 4 probe profiles to choose fromInterchangeable and reversible probe heads allow multiple combinations of connection and contactConsists of a sprung point to 4mm plug (with hard point), which is reversible2mm and 2.4mm plugsEach probe screws ...
    Fluke multimeters benefit from the availability of a ...
    Description:
    Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. • Both test leads and probes available• Durable connection, which guarantees excellent results• Single accessories and kits• Different safety categories ...