Reamer Bits

When completing high-performance projects that require the forming of precise holes in or through materials, the sides of the hole may require additional work to ensure they are completely smooth. In this case, reamers are designed to completely smooth the hole to a high degree of accuracy.


Due to the removal of the uneven material, reaming will slightly enlarge the hole you have created, therefore making it advisable to form the initial hole fractionally smaller to allow for the reaming space – this is called the allowance. It is recommended that the drilled hole should not be enlarged by more than 5% of the drilled diameter.


Typically made from carbide or high-speed steel (HSS), these multi-edged rotary cutting tools are used in metalworking for enlarging and finishing holes to a high level of precision and accuracy.


What types of reamer are there?


At RS Components, we have both machine reamer bits and hand reamer bits. The main difference between the two is that hand reamer bits have a longer taper or lead in at the front end of the bit, which compensates for the difficulty of using hand power alone.


Straight reamer bits are used to make only minor enlargements to holes, typically ones used for the force-fitting of location dowel pins or for unthreaded shoulder bolts.


With helical/spiralled reamer bits, a clockwise reamer will pull any debris up and out of a blind hole, whereas an anti-clockwise reamer will push debris forward, which can be helpful when creating a through-hole.


A tapered reamer is used to make a tapered hole for a tapered pin, which is a self-tightening device due to the shallow angle of the taper. They are commonly used in aircraft assembly and may only be re-reamed a small number of times during an aircraft’s career.


Combination reamers have two or more cutting surfaces, cut to resemble the part’s multiple internal diameters. Using combination reamers reduces the number of separate operations as well as precisely creating relative depths and diameters.


Adjustable reamers consist of several blades along a tapered groove that can be adjusted to cover a small range of hole sizes. They are restricted to light usage due to the absence of any spiral in the flute, meaning they will only remove minimal material for each diameter setting, and cannot be used in holes that have an axial split.


...
Read more Read less

Filters

Viewing 1 - 20 of 42 products
Results per page
Description Price Shank Type Diameter Overall Length Material
RS Stock No. 698-196
Mfr. Part No.B101 16MM
BrandDormer
SGD83.58
Each
units
Morse Taper 16mm 187 mm HSS
RS Stock No. 698-051
Mfr. Part No.B101 3/4
BrandDormer
SGD107.67
Each
units
Morse Taper 3/4in 200 mm HSS
RS Stock No. 698-174
Mfr. Part No.B101 14MM
BrandDormer
SGD68.09
Each
units
Morse Taper 14mm 161 mm HSS
RS Stock No. 224-4476
Mfr. Part No.B901 5.0MM
BrandDormer
SGD41.04
Each
units
Straight 5mm 87 mm HSS
RS Stock No. 224-4498
Mfr. Part No.B901 8.0MM
BrandDormer
SGD54.43
Each
units
Straight 8mm 115 mm HSS
RS Stock No. 394-302
BrandRS PRO
SGD196.38
Each
units
Straight 19 → 21mm 180 mm HSS
RS Stock No. 394-289
BrandRS PRO
SGD131.92
Each
units
Straight 12.75 → 13.75mm 145 mm HSS
RS Stock No. 698-203
Mfr. Part No.B101 19MM
BrandDormer
SGD118.25
Each
units
Morse Taper 19mm 193 mm HSS
RS Stock No. 394-251
BrandRS PRO
SGD116.23
Each
units
Straight 9.25 → 10mm 115 mm HSS
RS Stock No. 224-4454
Mfr. Part No.B901 3.0MM
BrandDormer
SGD49.70
Each
units
Straight 3mm 62 mm HSS
RS Stock No. 224-4482
Mfr. Part No.B901 6.0MM
BrandDormer
SGD48.47
Each
units
Straight 6mm 93 mm HSS
RS Stock No. 698-180
Mfr. Part No.B101 15MM
BrandDormer
SGD82.90
Each
units
Morse Taper 15mm 181 mm HSS
RS Stock No. 698-102
Mfr. Part No.B101 6MM
BrandDormer
SGD52.92
Each
units
Morse Taper 6mm 125 mm HSS
RS Stock No. 394-267
BrandRS PRO
SGD116.23
Each
units
Straight 10 → 10.75mm 125 mm HSS
RS Stock No. 188-2504
BrandRS PRO
SGD86.81
Each
units
Morse Taper 16mm 167 mm HSS
RS Stock No. 394-239
BrandRS PRO
SGD266.86
Each
units
Straight 21 → 23mm 85.72 mm HSS
RS Stock No. 188-2502
BrandRS PRO
SGD70.13
Each
units
Morse Taper 12mm 152 mm HSS
RS Stock No. 394-285
BrandRS PRO
SGD143.62
Each
units
Straight 13.75 → 15.25mm 150 mm HSS
RS Stock No. 394-279
BrandRS PRO
SGD124.90
Each
units
Straight 11.75 → 12.75mm 130 mm HSS
RS Stock No. 188-2501
BrandRS PRO
SGD63.84
Each
units
Morse Taper 10mm 127 mm HSS
Related Products
Introducing the series of high-performance HSS Hand Reamers ...
Description:
Introducing the series of high-performance HSS Hand Reamers Reamers form Dromer. These high-quality reamers have been designed for opening out and finishing holes to H7 tolerance in most ferrous and non-ferrous materials. Full range of Dormer B100 series hand reamers ...
Fully adjustable between specified ranges, ideal for reaming ...
Description:
Fully adjustable between specified ranges, ideal for reaming solid or split bearings/bushes etc.
Fully adjustable between specified ranges, ideal for reaming ...
Description:
Fully adjustable between specified ranges, ideal for reaming solid or split bearings/bushes etc.
HSS Spiral Flute straight Morse Taper shank machine ...
Description:
HSS Spiral Flute straight Morse Taper shank machine reamer for opening and finishing existing holes to H7 toleranceSuitable most ferrous and non-ferrous materials7° helix, Left Hand Spiral for excellent surface finishManufactured to BS328 standards.