Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter

  • Six fluted: These are ideal for producing fast shearing cuts


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 1 - 20 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length
RS Stock No. 248-5576
BrandRS PRO
SGD123.46
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm - - - - 6 - -
RS Stock No. 218-567
BrandRS PRO
SGD100.36
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 218-573
BrandRS PRO
SGD34.44
Each
units
Countersink 20mm 90° 5 HSS - 1 - -
RS Stock No. 673-8697
BrandRS PRO
SGD129.98
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 215-518
BrandRS PRO
SGD75.54
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - -
RS Stock No. 218-618
BrandRS PRO
SGD103.05
Each
units
Countersink Set 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm 90° 5 HSS - 6 - -
RS Stock No. 673-8691
BrandRS PRO
SGD14.53
Each
units
Countersink 6.3mm 90° 3 HSS 45 mm 1 5 mm 35mm
RS Stock No. 423-826
BrandRS PRO
SGD32.40
Each
units
Countersink 16.5mm 90° 3 HSS 40 mm 1 7.15 mm 21.5mm
RS Stock No. 218-595
BrandRS PRO
SGD22.99
Each
units
Countersink 12mm 90° 5 HSS - 1 - -
RS Stock No. 218-602
BrandRS PRO
SGD20.68
Each
units
Countersink 8mm 90° 5 HSS - 1 - -
RS Stock No. 218-551
BrandRS PRO
SGD16.21
Each
units
Countersink 6mm 90° 3 HSS - 1 - -
RS Stock No. 562-634
BrandRS PRO
SGD17.32
Each
units
Countersink 6mm 90° 5 HSS 45 mm 1 5 mm 35mm
RS Stock No. 456-898
BrandRS PRO
SGD35.77
Each
units
Countersink 12mm - 3 HSS 120 mm 1 - -
RS Stock No. 673-8708
BrandRS PRO
SGD21.63
Each
units
Countersink 12.4mm 90° 3 HSS 56 mm 1 8 mm 41mm
RS Stock No. 218-630
BrandRS PRO
SGD42.27
Each
units
Countersink 20mm 90° 3 HSS - 1 - -
RS Stock No. 215-467
BrandRS PRO
SGD120.98
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - -
RS Stock No. 673-8717
BrandRS PRO
SGD33.62
Each
units
Countersink 16.5mm 90° 3 HSS 63 mm 1 10 mm 42mm
RS Stock No. 215-473
BrandRS PRO
SGD19.79
Each
units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 45mm
RS Stock No. 423-850
BrandRS PRO
SGD43.10
Each
units
Countersink 21mm 90° - HSS 65 mm 1 7.15 mm 20mm
RS Stock No. 423-832
BrandRS PRO
SGD22.08
Each
units
Countersink 10.4mm 90° 5 HSS 31 mm 1 7.15 mm 21.5mm
Related Products
Micro HSS drills manufactured to produce precision holes ...
Description:
Micro HSS drills manufactured to produce precision holes in a range of materials including steel, aluminium, brass, polycarbonate and glass fibre. Drill sizes 0.5, 0.6, 0.8, 0.9, 1.0, 1.3, 1.6, 1.7, 2.0, 2.2mmSupplied in a plastic case.
Set Of 5 HSS A225 British Standard Centre ...
Description:
Set Of 5 HSS A225 British Standard Centre drills for general machining applications up to x1 diameter. Contains BS1, BS2, BS3, BS4 & BS5 drillsFor drilling components which require machining between centres60° countersink angle and 120° point angleManufactured to BS328 ...
Quality bits suitable for use in hand braces ...
Description:
Quality bits suitable for use in hand braces or power drillsHigh carbon steel with screw point and leading spur for drilling fast and accurate holesBit length 230mmSupplied in a sturdy wooden storage case.
A set containing some of the most commonly ...
Description:
A set containing some of the most commonly used masonry drills for electrical installation and maintenance work. High quality constructionEasy access plastic storage toll roll.