Linear Ball Bearings - Bearing Units

Filters

Viewing 1 - 20 of 67 products
Results per page
Description Price For Bearing Type Bearing Inside Diameter Bearing Outside Diameter Housing Dimensions Dynamic Load Rating Static Load Rating Housing Width Housing Height Housing Length Series
RS Stock No. 284-9374
Mfr. Part No.LUHR 20
SGD108.27
Each
units
Closed 20mm 28mm 53 x 30 x 45mm 1160N 800N 30mm 45mm 53mm -
RS Stock No. 284-9453
Mfr. Part No.LUHR 25-2LS
SGD135.76
Each
units
Closed 25mm 35mm 62 x 40 x 54mm 2120N 1560N 40mm 54mm 62mm -
RS Stock No. 284-9425
Mfr. Part No.LUHR 12-2LS
SGD94.02
Each
units
Closed 12mm 19mm 40 x 28 x 33mm 695N 510N 28mm 33mm 40mm -
RS Stock No. 172-1239
Mfr. Part No.KGB12-PP-AS
BrandINA
SGD131.54
Each
units
Closed 12mm - 32 x 52 x 35.8mm 540N 385N 52mm 35.8mm 32mm KGB
RS Stock No. 409-444
Mfr. Part No.R103561020
SGD109.30
Each
units
- - - - 730N 380N - - - -
RS Stock No. 172-1244
Mfr. Part No.KGB40-PP-AS
BrandINA
SGD275.08
Each
units
Closed 40mm - 80 x 108 x 83.5mm 6000N 4400N 108mm 83.5mm 80mm KGB
RS Stock No. 172-1240
Mfr. Part No.KGB16-PP-AS
BrandINA
SGD148.55
Each
units
Closed 16mm - 36 x 56 x 37.5mm 710N 530N 56mm 37.5mm 36mm KGB
RS Stock No. 172-1270
Mfr. Part No.KGSNO30-PP-AS
BrandINA
SGD213.89
Each
units
Open 30mm - 60 x 68 x 87mm 5900N 6000N 68mm 87mm 60mm KGSN
RS Stock No. 172-1243
Mfr. Part No.KGB30-PP-AS
BrandINA
SGD229.79
Each
units
Closed 30mm - 68 x 88 x 66.5mm 3600N 2850N 88mm 66.5mm 68mm KGB
RS Stock No. 172-1302
Mfr. Part No.KTSO30-PP-AS
BrandINA
SGD396.17
Each
units
Open 30mm - 142 x 87 x 60mm 9600N 12000N 87mm 60mm 142mm KTSO
RS Stock No. 194-7241
Mfr. Part No.KTSG20-PP-AS
BrandINA
SGD352.85
Each
units
Closed 20mm - 96 x 60 x 50mm 3500N 4600N 60mm 50mm 96mm KTSG
RS Stock No. 284-9447
Mfr. Part No.LUHR 20-2LS
SGD116.41
Each
units
Closed 20mm 28mm 53 x 30 x 45mm 1160N 800N 30mm 45mm 53mm -
RS Stock No. 409-397
Mfr. Part No.R102721644
SGD96.15
Each
units
- - - - 1050N 570N - - - -
RS Stock No. 409-501
Mfr. Part No.R103561620
SGD116.30
Each
units
- - - - 1250N 620N - - - -
RS Stock No. 194-7243
Mfr. Part No.KTSG30-PP-AS
BrandINA
SGD527.85
Each
units
Closed 30mm - 142 x 87 x 70mm 9600N 12000N 87mm 70mm 142mm KTSG
RS Stock No. 285-0194
Mfr. Part No.LUNE12 D-2LS
SGD137.65
Each
units
Closed 12mm 22mm 43 x 32 x 35mm 1080N 815N 32mm 35mm 43mm -
RS Stock No. 172-1262
Mfr. Part No.KGHK25-B-PP-AS
BrandINA
SGD137.57
Each
units
Closed 25mm - 40.2 x 60 x 52.5mm 2280N 1670N 60mm 52.5mm 40.2mm KGHK
RS Stock No. 194-7242
Mfr. Part No.KTSG25-PP-AS
BrandINA
SGD458.10
Each
units
Closed 25mm - 122 x 78 x 60mm 6400N 8600N 78mm 60mm 122mm KTSG
RS Stock No. 172-1272
Mfr. Part No.KGSNOS20-PP-AS
BrandINA
SGD197.54
Each
units
Open 20mm - 42 x 45 x60mm 2200N 2310N 45mm 60mm 42mm KGSN
RS Stock No. 172-1261
Mfr. Part No.KGHK20-B-PP-AS
BrandINA
SGD122.02
Each
units
Closed 20mm - 30.2 x 53 x 42.5mm 1110N 790N 53mm 42.5mm 30.2mm KGHK
Related Products
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
Shaft support blocks are used to support shafts ...
Description:
Shaft support blocks are used to support shafts and locate the ends of the shaft.They are suitable for all the solid and hollow shafts in this catalogue.They are made from either an aluminium alloy or pressure diecast zinc.Series GWA is ...
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...