Power Transmission - Gears

You can shop with total confidence for gears at RS Components. Our extensive range of mitre and bevel gears as well as spur and worm gears are all RS branded, meaning you can cut the cost but not the quality. You will also find an expert selection of gear rack rails and fixing kits.

Guides & Articles

article1_image

Seals & O-rings Guide

In our comprehensive guide, we look at what o-rings and seals are, what they’re used for, as well as the different types that are available.

article1_image

Gasket Sheets Guide

The only guide you will ever need to understand what gasket paper is, how it's used and what's currently available.

Related Products
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
A range of steel bevel gears. Made from ...
Description:
A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²20° pressure angle.
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
Worm gears and pinion gears designed to produce ...
Description:
Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure ...