Pneumatic Pin Cylinders

Pneumatic pin (needle) cylinders are compact (space saving) mechanical devices that transform compressed air power into linear forces to drive a mechanical motion. A cylinder consists of a piston, rod and plunger surrounded by a cylindrical bore.

These cylinders occupy less space than other pneumatic cylinders because components like switches can be mounted onto them via panel (on top of device) or embedded mounting (inside device).

Their bodies are made of brass and the rods are constructed of stainless steel for extra durability. They do not require additional lubrication which makes them relatively maintenance free.

What are pneumatic pin cylinders used for?

Pin cylinders are used for precision parts assembling in tight spaces. For example during automated soldering activities where components to be joined (soldered) are located behind panel enclosures and can only be accessed through tiny openings.

Types of pneumatic pin cylinders

  • Single acting means there is one port from where the compressed air flows to push the rod out. The rod is then retracted with a spring mechanism.
  • Double acting means there are two ports from which compressed air can flow out and back in to push and retract the rod.

...
Read more Read less

Filters

Viewing 41 - 49 of 49 products
Results per page
Description Price Manufacturer Series Action Bore Stroke Piston Speed Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Force at 7 bar Port Connection Dimensions Weight Minimum Piston Speed Diameter
RS Stock No. 183-3952
Mfr. Part No.CJPB6-10H6
BrandSMC
SGD29.53
Each
units
CJP Single 6mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 34.5 x 12 x 13.9mm 13.1g 50mm/s -
RS Stock No. 547-534
Mfr. Part No.CDJP2B10-10D
BrandSMC
SGD58.55
Each
units
CJP2 Double 10mm 10mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 49.5 x 15 x 19mm 29g 50mm/s -
RS Stock No. 686-2554
Mfr. Part No.CUJB10-10S
BrandSMC
SGD49.65
Each
units
CUJ Single 10mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M3 x 0.5 29 x 13.5 x 22mm 22.3g 50mm/s -
RS Stock No. 890-3247
Mfr. Part No.CDJ2B10-60Z-B
BrandSMC
SGD62.56
Each
units
- Double 10mm 60mm 50 → 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 134 x 12 x 12mm 24g 50mm/s -
RS Stock No. 264-6169
Mfr. Part No.CJ1B4-20SU4
BrandSMC
SGD37.40
Each
units
CJ1 Single 4mm 20mm 50 → 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 67mm 13.2g 50mm/s 5mm
RS Stock No. 547-562
Mfr. Part No.CDJP2B10-25D
BrandSMC
SGD63.09
Each
units
CJP2 Double 10mm 25mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 64.5 x 15 x 19mm 37g 50mm/s -
RS Stock No. 547-631
Mfr. Part No.CDJP2B16-40D
BrandSMC
SGD75.05
Each
units
CJP2 Double 16mm 40mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 83.5 x 20 x 24.5mm 71g 50mm/s -
RS Stock No. 547-613
Mfr. Part No.CDJP2B16-20D
BrandSMC
SGD69.02
Each
units
CJP2 Double 16mm 20mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 63.5 x 20 x 24.5mm 54g 50mm/s -
RS Stock No. 547-518
Mfr. Part No.CDJP2B10-35D
BrandSMC
SGD65.39
Each
units
CJP2 Double 10mm 35mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 74.5 x 15 x 19mm 43g 50mm/s -
Related Products
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...