Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.

Grippers can be divided into 2 main categories by type of holding objects:
• External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object.
• Internal – When the access to object’s exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object.

What to consider when choosing the gripper:
• Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force.
• Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind.
• Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement.
• Environmental - Harsh environment or clean room applications require grippers designed for those purposes.
• Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
Read more Read less

Filters

Viewing 61 - 80 of 101 products
Results per page
Description Price Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight Size Type
RS Stock No. 196-4475
Mfr. Part No.MHSL3-50D
BrandSMC
SGD1,116.93
Each
units
MHSL3 Double 3 Parallel 0.6 MPa - - M5 930g Standard
New
RS Stock No. 203-1474
Mfr. Part No.DHPS-16-A
BrandFesto
SGD755.08
Each
units
DHPS-16-A Double 2 Parallel 8 bar - - - - -
RS Stock No. 196-4477
Mfr. Part No.MHZJ2-10D
BrandSMC
SGD640.22
Each
units
MHZ Double 2 Parallel 0.7 MPa - - M3 x 0.5 60g Standard
New
RS Stock No. 203-1480
Mfr. Part No.DHPS-25-A-NO
BrandFesto
SGD1,103.89
Each
units
DHPS-25-A-NO Double 2 Parallel 8 bar - - - - -
New
RS Stock No. 203-1470
Mfr. Part No.DHDS-16-A-NC
BrandFesto
SGD1,061.25
Each
units
DHDS-16-A-NC Double 3 - 8 bar - - - - -
RS Stock No. 366-3610
Mfr. Part No.MHZ2-20DN
BrandSMC
SGD608.68
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g -
New
RS Stock No. 203-1496
Mfr. Part No.DHPS-25-A-NC
BrandFesto
SGD1,103.89
Each
units
DHPS-25-A-NC Double 2 Parallel 8 bar - - - - -
RS Stock No. 182-5838
Mfr. Part No.MHC2-10D
BrandSMC
SGD308.56
Each
units
MHC2 Double 2 Angle 0.6 MPa - - M3 x 0.5 39g -
New
RS Stock No. 203-1656
Mfr. Part No.DHRS-32-A
BrandFesto
SGD1,097.56
Each
units
DHRS-32-A Double 2 Radial 8 bar - - - - -
RS Stock No. 366-3604
Mfr. Part No.MHZ2-16DN
BrandSMC
SGD528.11
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g -
RS Stock No. 196-4474
Mfr. Part No.MHSH3-50D
BrandSMC
SGD1,275.87
Each
units
MHSH3 Double 3 Parallel 0.6 MPa - - - 970g Standard
RS Stock No. 196-4478
Mfr. Part No.MHZJ2-16D
BrandSMC
SGD644.46
Each
units
MHZ Double 2 Parallel 0.7 MPa - - M5 x 0.8 130g Standard
RS Stock No. 196-4467
Mfr. Part No.MDHR2-10R
BrandSMC
SGD695.90
Each
units
MDHR2 Double 2 Parallel 0.6 MPa - - M3 100g Standard
RS Stock No. 700-7342
Mfr. Part No.MHZ2-25D
BrandSMC
SGD724.64
Each
units
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 430g -
New
RS Stock No. 203-1503
Mfr. Part No.DHPS-20-A-NC
BrandFesto
SGD935.60
Each
units
DHPS-20-A-NC Double 2 Parallel 8 bar - - - - -
New
RS Stock No. 203-1487
Mfr. Part No.DHPS-10-A-NC
BrandFesto
SGD660.69
Each
units
DHPS-10-A-NC Double 2 Parallel 8 bar - - - - -
RS Stock No. 700-7297
Mfr. Part No.MHF2-8D1
BrandSMC
SGD726.33
Each
units
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M3 85g -
RS Stock No. 196-4473
Mfr. Part No.MHS2-25D
BrandSMC
SGD661.49
Each
units
MHS Double 2 Parallel 0.6 MPa - - M5 134g Standard
New
RS Stock No. 203-1481
Mfr. Part No.DHRS-25-A-NC
BrandFesto
SGD950.42
Each
units
DHRS-25-A-NC Double 2 Radial 8 bar - - - - -
New
RS Stock No. 203-1504
Mfr. Part No.DHWS-40-A
BrandFesto
SGD881.97
Each
units
DHWS-40-A Double 2 Angle 8 bar - - - - -
Related Products
The Festo OGGB series Bernoulli gripper is suited ...
Description:
The Festo OGGB series Bernoulli gripper is suited to transporting thin, extremely delicate and brittle work pieces. It is on top/at side position of connection with 60 mm gripper diameter. Nominal operating pressure = 1 barAir consumption = 110 l/minAssembly ...
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
The MHS series parallel style air grippers have ...
Description:
The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are ...