Pneumatic Pressure Regulator Function Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic pressure regulator function fittings being one example.

What are pneumatic pressure regulator function fittings used for?

Pneumatic pressure regulator function fittings are used to ensure the pressure in the system stays within the desired range. If the pressure gets too high or too low the fittings are activated and the flow is adjusted to prevent an over or under pressure.

Types of pneumatic pressure regulator function fittings

Pneumatic pressure regulator function fittings come in a variety of diameters, fits, grades and pressure ranges.


...
Read more Read less

Filters

Viewing 1 - 11 of 11 products
Results per page
Description Price Manufacturer Series Threaded Inlet Port Tube Inlet Port Outlet Port Type Tube Outlet Port Maximum Input Pressure Minimum Outlet Pressure Threaded Inlet Port Thread Standard Maximum Outlet Pressure Threaded Inlet Port Gender Threaded Inlet Port Size Inlet Port Type
RS Stock No. 398-5538
Mfr. Part No.7300 08 10
BrandLegris
SGD64.20
Each
units
7300 G 1/8 Male - Tube 8mm 16bar - G - Male 1/8 in Threaded
RS Stock No. 398-5500
Mfr. Part No.7300 04 10
BrandLegris
SGD60.31
Each
units
7300 G 1/8 Male - Tube 4mm 16bar - G - Male 1/8 in Threaded
RS Stock No. 398-5522
Mfr. Part No.7300 06 13
BrandLegris
SGD62.04
Each
units
7300 G 1/4 Male - Tube 6mm 16bar - G - Male 1/4 in Threaded
New
RS Stock No. 203-8670
Mfr. Part No.LR-1/4-QS-6
BrandFesto
SGD98.66
Each
units
LR-1/4-QS-6 - 6mm Threaded 6mm - - - - - 1/4 Threaded
New
RS Stock No. 203-8520
Mfr. Part No.LR-1/4-QS-8
BrandFesto
SGD105.00
Each
units
LR-1/4-QS-8 - 8mm Threaded 8mm - - - - - 1/4 Threaded
New
RS Stock No. 203-8671
Mfr. Part No.LR-1/8-QS-6
BrandFesto
SGD90.97
Each
units
LR-1/8-QS-6 - G1/8 Threaded 6mm - - - - - 1/8: Threaded
RS Stock No. 387-4854
Mfr. Part No.016H6703
BrandEliwell
SGD72.32
Each
units
016H G 1/4 Male - - - - 0bar G 7bar Male 1/4 in Threaded
New
RS Stock No. 203-8564
Mfr. Part No.LR-1/8-QS-8
BrandFesto
SGD96.47
Each
units
LR-1/8-QS-8 - 8mm Threaded 8mm - - - - - 1/8: Threaded
RS Stock No. 398-5516
Mfr. Part No.7300 06 10
BrandLegris
SGD66.63
Each
units
7300 G 1/8 Male - Tube 6mm 16bar - G - Male 1/8 in Threaded
New
RS Stock No. 203-8539
Mfr. Part No.LR-1/8-QS-4
BrandFesto
SGD84.63
Each
units
LR-1/8-QS-4 - G1/8 Threaded 4mm - - - - - 1/8: Threaded
RS Stock No. 398-5544
Mfr. Part No.7300 08 13
BrandLegris
SGD71.44
Each
units
7300 G 1/4 Male - Tube 8mm 16bar - G - Male 1/4 in Threaded
Related Products
Protects downstream equipment from pressure fluctuations and can ...
Description:
Protects downstream equipment from pressure fluctuations and can increase the power of an existing actuatorRelieving pressure regulating methodAll ports have tapered threads.
The Festo FR-8 series aluminium die cast distributor ...
Description:
The Festo FR-8 series aluminium die cast distributor block has port connections of 1/2, 3/4 and a thread standard is G. It has 8 number of output ports and a single supply lines. This component is used on mounting frames, ...
Combined HP/BP pressure regulators with automatic rearming.Lid to ...
Description:
Combined HP/BP pressure regulators with automatic rearming.Lid to limit access to the adjustment screw.Compatible with all types of coolants.Screw connection.Relay output.
The Festo service unit consisting of filter regulator, ...
Description:
The Festo service unit consisting of filter regulator, distributor module and lubricator which has metal bowl guard with pressure gauge. It has manual condensate drain with standard nominal flow rate 980 l/min. Ambient temperature -10 to 60 °CMaximum condensate volume ...