Pneumatic Manifold Tube-to-Tube Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic manifold tube-to-tube fittings being one example.

What are pneumatic manifold tube-to-tube fittings used for?

Pneumatic manifold tube-to-tube fittings allow a number of tubes to be connected together via a central manifold. They can connect a range of numbers of hoses in a variety of arrangements and orientations.

Types of pneumatic manifold tube-to-tube fittings

Pneumatic manifold tube-to-tube fittings come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 21 - 28 of 28 products
Results per page
Description Price Manufacturer Series Number of Outlet Ports Outlet Port Number of Inlet Ports Inlet Port Material Maximum Operating Pressure Outlet Port - Connection Type Inlet Port - Tube Size Inlet Port - Connection Type Outlet Port - Tube Size Maximum Operating Temperature Minimum Operating Temperature Connection Style
RS Stock No. 245-3068
Mfr. Part No.KM11-08-12-10
BrandSMC
SGD42.17
Each
units
KM 10 Push In 8 mm 1 Push In 12 mm PBT 1 MPa Push In 12mm Push In 8mm +60°C -5°C Tube-to-Tube
New
RS Stock No. 203-8468
Mfr. Part No.CQH-22-QS-16
BrandFesto
SGD10.89
Each
units
CQH-22-QS-16 1 - 1 - POM - - - - - - - -
RS Stock No. 400-3334
Mfr. Part No.KM13-08-10-3
BrandSMC
SGD19.43
Each
units
KM 3 Push In 8 mm 1 Push In 10 mm PBT 1 MPa Push In 10mm Push In 8mm +60°C -5°C Tube-to-Tube
New
RS Stock No. 203-8477
Mfr. Part No.CQH-18-QS-16
BrandFesto
SGD7.89
Each
units
CQH-18-QS-16 1 - 1 - POM - - - - - - - -
RS Stock No. 202-3541
Mfr. Part No.CQD-12/15/18/22
BrandFesto
SGD50.97
Each
units
CQD 4 - 1 - POM - - - - - - - -
RS Stock No. 400-3328
Mfr. Part No.KM13-06-10-3
BrandSMC
SGD17.93
Each
units
KM 3 Push In 6 mm 1 Push In 10 mm PBT 1 MPa Push In 10mm Push In 6mm +60°C -5°C Tube-to-Tube
RS Stock No. 245-3052
Mfr. Part No.KM11-04-08-10
BrandSMC
SGD35.64
Each
units
KM 10 Push In 4 mm 1 Push In 8 mm PBT 1 MPa Push In 8mm Push In 4mm +60°C -5°C Tube-to-Tube
RS Stock No. 400-3299
Mfr. Part No.KM13-04-06-3
BrandSMC
SGD11.40
Each
units
KM 3 Push In 4 mm 1 Push In 6 mm PBT 1 MPa Push In 6mm Push In 4mm +60°C -5°C Tube-to-Tube
Related Products
The Parker Hannifin range of stainless steel Instrumentation ...
Description:
The Parker Hannifin range of stainless steel Instrumentation tubing, tube fittings, valves, regulators and manifolds are manufactured to meet the demand for precision-engineered instrumentation components of the highest quality. All products meet or exceed the relevant worldwide standards.,A-LOK® double ferrule ...
ENOTS compression fittings are ideal for most general ...
Description:
ENOTS compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
The festo push-in sleeve CQH-18-QS-16 to be used ...
Description:
The festo push-in sleeve CQH-18-QS-16 to be used as a connection from CQ to QS-fittings. It has 11 mm nominal size. Assembly position AnyContainer size 1Design structure Push/pull principleOperating pressure complete temperature range -0,95 - 7 bar.
The nut festo CR-M30X1,5 For type CRHD is ...
Description:
The nut festo CR-M30X1,5 For type CRHD is made from high-alloy steel. It is free of copper and PTFE. Assembly position AnyCorrosion resistance classification CRC 4 - Very high corrosion stressProduct weight 40 gMaterial mounting High alloy steel, non-corrosive.