Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 61 - 80 of 665 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 916-0858
BrandRS PRO
SGD3.811
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 144-2615
BrandRS PRO
SGD28.79
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/4 Push In 8 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1806
BrandRS PRO
SGD8.934
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-0958
BrandRS PRO
SGD4.518
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 10 mm Male 90° Brass - Brass - No - - - -
New
RS Stock No. 187-5701
BrandRS PRO
SGD53.56
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-1413
BrandRS PRO
SGD4.579
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 916-0772
BrandRS PRO
SGD3.049
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
RS Stock No. 176-1351
BrandRS PRO
SGD6.895
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 144-2611
BrandRS PRO
SGD19.12
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 6 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 144-2613
BrandRS PRO
SGD25.94
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/4 Push In 6 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-2219
BrandRS PRO
SGD128.838
Each (In a Pack of 10)
units
Threaded G 1/2 G 1/2 Male 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
RS Stock No. 916-0849
BrandRS PRO
SGD3.655
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male - Polyoxymethylene - Nickel Plated Brass - No - 10 bar +60°C 0°C
New
RS Stock No. 187-5703
BrandRS PRO
SGD70.29
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-1332
BrandRS PRO
SGD3.788
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-2173
BrandRS PRO
SGD48.389
Each (In a Pack of 10)
units
Tube-to-Tube Push In 8 mm Push In 8 mm - 90° Stainless Steel - - - No - 20 bar +200°C -15°C
RS Stock No. 176-1810
BrandRS PRO
SGD11.702
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 14 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1350
BrandRS PRO
SGD5.293
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1334
BrandRS PRO
SGD4.079
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1818
BrandRS PRO
SGD13.135
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 14 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 299-4070
BrandRS PRO
SGD3.62
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/4 Push In 8 mm Male 90° - - - - No - 15 bar +70°C -18°C
Related Products
The flared ridge ferrule prevents accidental loss of ...
Description:
The flared ridge ferrule prevents accidental loss of ferrule when inserting tubing into the fitting body. The hardened ridge reffule prevents breakage of the ferrule when tightening the nut.
SMC KP fittings are designed for clean room ...
Description:
SMC KP fittings are designed for clean room and washing line applications and can be used with pure water, air and nitrogen gas. KP fittings have no metal parts in contact with the fluid and are totally oil free. The ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release ...
SMC’s KQG2 stainless steel range provides engineers with ...
Description:
SMC’s KQG2 stainless steel range provides engineers with a choice of high performance, lightweight, compact push in fittings for when resistance to corrosion, chemicals and high temperatures is vital. 30% smaller and 62% lighter than the existing KQG range and ...