Hand Held Wired Microphones

Hand-held wired microphones are used to amplify sound at presentations, performances and other live events. They need to be plugged into an item of audio equipment.

What are hand-held wired microphones used for?

Hand-held wired microphones are used to provide clear sound amplification at live and recorded events. They might be used during speeches, vocal performances and instrumental performances. An alternative is a hand held wireless microphone, which functions in the same way but allows the user to move around unimpeded.

Types of hand-held wired microphones

Hand-held wired microphones are designed for different uses. For instance, certain microphones are best suited for recording vocals, instruments, or ordinary speech. The right microphone can play a decisive role in the audiences perception of a speech or performance.

A common type of microphone is the unidirectional microphone. This type of microphone is primarily sensitive to sounds from a single direction. The cardioid microphone is the most common unidirectional microphone. Its name is derived from its heart-shaped sensitivity pattern (hence, 'cardioid'). Cardioid microphones are commonly used as vocal or speech microphones, as they are excellent at rejecting sounds coming from other directions.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Directionality/Polar Pattern Frequency Response Maximum Sound Pressure Level Impedance Sensitivity Connector On/Off Switch Cable Included Length Weight Head Diameter Maximum Frequency Response Minimum Frequency Response Type
RS Stock No. 352-2698
BrandRS PRO
SGD21.39
Each
units
Unidirectional 70 Hz → 14 kHz - 500Ω -75dB 6.3 mm Mono Plug Yes Yes 208mm - 54mm 14 kHz 70 Hz Dynamic
RS Stock No. 665-9872
Mfr. Part No.SM57-LCE
BrandShure
SGD232.25
Each
units
Unidirectional 40 Hz → 15 kHz - 310Ω -54.5dBV/Pa XLR - - 157mm 284g 32mm 15 kHz 40 Hz Dynamic
RS Stock No. 883-7718
Mfr. Part No.PGA58-XLR-E
BrandShure
SGD135.25
Each
units
Cardioid 50 Hz to 16 kHz 94dB 150Ω -55dBV/Pa 3-Pin Professional Audio (XLR) Yes Yes 4.6m 294g - 16000 Hz 50 Hz Dynamic
RS Stock No. 250-514
Mfr. Part No.SM58-LCE
BrandShure
SGD232.25
Each
units
Unidirectional 50 Hz → 15 kHz - 300Ω -54.5dBV/Pa XLR - - 162mm 298g 51mm 15 kHz 50 Hz Dynamic
RS Stock No. 883-7712
Mfr. Part No.PGA57-XLR
BrandShure
SGD135.25
Each
units
Cardioid 70 Hz to 15 kHz 94dB 150Ω -56.5dBV/Pa 3-Pin Professional Audio (XLR) Yes Yes 4.6m 280g - 15000 Hz 70 Hz Dynamic
Related Products
The STEVAL-MIC001V1 daughterboard is designed to be used ...
Description:
The STEVAL-MIC001V1 daughterboard is designed to be used in conjunction with the X-NUCLEO-CCA02M1 expansion board, it is able to export the four additional PDMs for any user application requirement (NBW algorithm detection). 4 x MP34DT05-A top port digital MEMS microphonesDaughterboard ...
Features:• Single supply voltage operation 1.52 V - ...
Description:
Features:• Single supply voltage operation 1.52 V - 3.6 V • Omnidirectional sensitivity • High signal-to-noise ratio • High acoustic overload point: 130 dBSPL typ. • Package compliant with reflow soldering • Enhanced RF immunity • Ultra-flat frequency response • ...
Wide range condenser microphone designed for use on ...
Description:
Wide range condenser microphone designed for use on flat surfaces in meeting rooms, conferences, video conferences, studios, schools, etc. Unobtrusive and easy to useElectret element for greater frequency response and dynamic rangeUnidirectional pattern via low cut filter.
Miniature Boundary Microphones designed for surface mounted applications. ...
Description:
Miniature Boundary Microphones designed for surface mounted applications. Ideal for times when minimum visibility is required. Permanently attached miniature cableCharge fixed on the back plate2 microns thick gold vaporized diaphragmMicrophone enclosed in a sturdy case protected by perforated steelRubber non ...