Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 122 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 206-536
BrandRS PRO
SGD0.492
Each (In a Pack of 5)
units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - - -
RS Stock No. 438-9515
BrandRS PRO
SGD3.40
Each
units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - - -
RS Stock No. 589-783
BrandRS PRO
SGD1.708
Each (In a Pack of 5)
units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 589-777
BrandRS PRO
SGD1.574
Each (In a Pack of 5)
units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 811-642
BrandRS PRO
SGD0.926
Each (In a Pack of 5)
units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - - -
RS Stock No. 811-664
BrandRS PRO
SGD1.076
Each (In a Pack of 5)
units
PCB Mount - Wedge - - 12 mm - - - - - - -
RS Stock No. 210-793
BrandRS PRO
SGD0.622
Each (In a Pack of 5)
units
- LED - - 11mm 21 mm - - - - - - -
RS Stock No. 811-715
BrandRS PRO
SGD1.106
Each (In a Pack of 5)
units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - - -
RS Stock No. 237-0575
Mfr. Part No.A1050OAAAD
SGD4.37
Each
units
Panel Mount LED Screw In Wire Leads 10mm 17.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 890-4907
Mfr. Part No.103-3101-05-103
BrandDialight
SGD36.65
Each
units
- - Candelabra Screw Screw - 47.6 mm S6 - - Panel Mount - 103 6 → 250 V
RS Stock No. 585-898
Mfr. Part No.MTMU/240/4
BrandTranilamp
SGD31.10
Each
units
Panel Mount - E10 Cable Clamp 35mm 67 mm - - - Panel Mount - MTMU 240 V
RS Stock No. 561-707
Mfr. Part No.TMU/240/4
BrandTranilamp
SGD19.98
Each
units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - TMU -
RS Stock No. 890-5219
Mfr. Part No.367-8430-09-503
BrandDialight
SGD7.09
Each
units
- - Midget Flange Solder - 15.9 mm T1 3/4 - - Panel Mount - 367 -
RS Stock No. 565-119
Mfr. Part No.T0063AOFAB
SGD3.70
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 565-147
Mfr. Part No.T0063AOFAD
SGD3.58
Each
units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 387-5380
Mfr. Part No.LMU/MES/4
BrandTranilamp
SGD5.41
Each
units
Panel Mount - E10 Cable Clamp 35mm 42 mm - - - Panel Mount - LMU -
RS Stock No. 890-4963
Mfr. Part No.125-1363-11-113
BrandDialight
SGD32.56
Each
units
- - Miniature Bayonet Screw 15.9mm 31.2 mm T3 1/4 - - Panel Mount - 125 110 → 125 V ac
RS Stock No. 890-4969
Mfr. Part No.125-1310-11-103
BrandDialight
SGD25.96
Each
units
- - Miniature Bayonet Screw 15.9mm 31.4 mm T1 3/4 - - Panel Mount - 125 2 → 120 V
RS Stock No. 237-0474
Mfr. Part No.A104700AAA
SGD3.30
Each
units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - - -
RS Stock No. 171-2603
Mfr. Part No.OR1208
BrandOrbitec
SGD31.24
1 Box of 10
Box(es)
- - E10 - - - - - - Screw Mount - 0668 -
Related Products
Brought to you under the trusted RS Pro, ...
Description:
Brought to you under the trusted RS Pro, these LED indicators have diffused epoxy lenses and a chrome bezel. The body features convenient solder lug termination for a quick and easy connection. RS Pro LED indicators give a high level ...
The nickel plated brass body is supplied with ...
Description:
The nickel plated brass body is supplied with an insulation washer, solder tag, fixing nut and washer. Electrical connections are made via the solder tag and body return.,The caps incorporate a nickel plated brass screw with polycarbonate fresnel lens. The ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...
Designed to accept either LED or incandescent BA9s ...
Description:
Designed to accept either LED or incandescent BA9s bulbsRecognised under the component program of ULSupplied with O-ring to enhance water sealing capabilitiesNickel plated brass bodyElectrical connections via solder tagsOperating voltage 6 to 120Vac/dc (dependent on chosen bulb voltage).