Thermal Grease

Thermal grease is known by a number of names including: CPU grease heat paste heat sink compound or paste thermal compound, gel or paste thermal interface material.It is a thermally conductive material which is usually electrically insulating which helps to dissipate heat from a device. Its main function is to ensure there is no air space between which would act as a thermal insulator. It fills in the microscopic imperfections on the heatsink and device.It is most commonly used between a CPU and a heat sink to maximise heat transfer. It is also used on other electronic components which create heat and also need a heat sink such as MOSFET transistors.There are other types of products to eliminate the air gap under a heat sink: Thermal Adhesive Thermal Gap Pads

...
Read more Read less

Filters

Viewing 1 - 20 of 39 products
Results per page
Description Price Thermal Conductivity Material Maximum Operating Temperature Minimum Operating Temperature Pack Size Chemical Component Operating Temperature Range Physical State
RS Stock No. 707-4736
BrandRS PRO
SGD41.18
Each
units
5W/m·K Silicone +180°C -40°C 30g - -40 → +180 °C -
RS Stock No. 909-2092
BrandRS PRO
SGD152.74
Each
units
3.4W/m·K - +125°C -30°C - - -30 → +125 °C -
RS Stock No. 915-6118
BrandRS PRO
SGD32.84
Each
units
4W/m·K Non-Silicone +150°C -50°C - - -50 → +153 °C -
RS Stock No. 707-4733
BrandRS PRO
SGD22.16
Each
units
1.8W/m·K Silicone +180°C -40°C 30g - -40 → +180 °C -
RS Stock No. 707-4724
BrandRS PRO
SGD35.20
Each
units
3.6W/m·K Silicone +180°C -40°C 30g - -40 → +180 °C -
RS Stock No. 915-6105
BrandRS PRO
SGD25.46
Each
units
2W/m·K Non-Silicone +150°C -50°C - - -50 → +150 °C -
RS Stock No. 915-6111
BrandRS PRO
SGD342.05
Each
units
4W/m·K Non-Silicone +150°C -50°C - - -50 → +152 °C -
RS Stock No. 915-6109
BrandRS PRO
SGD187.92
Each
units
2W/m·K Non-Silicone +150°C -50°C - - -50 → +151 °C -
RS Stock No. 554-311
BrandRS PRO
SGD29.52
Each
units
0.65W/m·K Metal Oxide +200°C -40°C 20mL Powdered Metal Oxides, Silicone Oil -40 → +200 °C -
RS Stock No. 217-3835
BrandRS PRO
SGD21.37
Each
units
2.9W/m·K Silicone +200°C -40°C 20mL Powdered Metal Oxides, Silicone Oil -40 → +200 °C -
RS Stock No. 665-4846
Mfr. Part No.CW7270
SGD22.12
Each
units
0.71W/m·K Non-Silicone +200°C -15°C 8g - -15 → +200 °C -
RS Stock No. 277-8200
Mfr. Part No.CT40-5
SGD38.26
Each
units
0.63W/m·K Silicone +200°C -73°C 142g - -73 → +200 °C -
RS Stock No. 127-035
Mfr. Part No.TIC1000A-00-00-5.0CC
BrandBergquist
SGD122.03
Each
units
1.5W/m·K Non-Silicone +150°C - 0.5mL - Maximum of +150 °C -
RS Stock No. 665-4855
Mfr. Part No.CW7250
SGD28.74
Each
units
1.85W/m·K Boron Nitride +200°C -73°C 8g - -73 → +200 °C -
RS Stock No. 362-9698
Mfr. Part No.GF2000-00-15-50CC
BrandBergquist
SGD231.38
Each
units
2W/m·K Gap Filler 2000 +200°C -60°C 50mL - -60 → +200 °C -
RS Stock No. 124-7692
Mfr. Part No.8617-85ml
SGD76.01
Each
units
1W/m·K - +165°C -68°C 85mL - -68 → +165 °C -
RS Stock No. 174-4911
Mfr. Part No.ERHTCP02S
SGD15.09
Each
units
2.5W/m·K Non-Silicone +130°C -50°C 2mL - -50 → +130 °C -
RS Stock No. 181-1273
Mfr. Part No.GP300
SGD23.39
Each
units
- Silicone +160°C -50°C - - -50 → +160 °C -
RS Stock No. 301-2826
Mfr. Part No.HTSP50T
SGD70.04
Each
units
3W/m·K Silicone +200°C -50°C 50mL - -50 → +200 °C -
RS Stock No. 124-7691
Mfr. Part No.8616-85ml
SGD82.10
Each
units
1.8W/m·K - +165°C -68°C 85mL - -68 → +165 °C -
Related Products
Electrolube HTCX is an enhanced version of HTC ...
Description:
Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any ...
HTSX is a silicone thermal interface material (TIM) ...
Description:
HTSX is a silicone thermal interface material (TIM) which has been developed to perform in more extreme conditions than its sister product HTS. It exhibits extended characteristics to HTS, with higher thermal conductivity, extended operating temperatures and excellent stability with ...
A non silicone heat transfer compound containing various ...
Description:
A non silicone heat transfer compound containing various metal oxide (ceramic) powders which give exceptional thermal conductivity. Excellent non creep characteristicsExcellent thermal conductivity even at high temperaturesEasy to handleLow evaporation weight lossWhite colour for ease of identification in ...
In some applications, the GAP Pad exerts a ...
Description:
In some applications, the GAP Pad exerts a pressure unable to cope with risks of deterioration. For other applications, it is impossible to apply due to inaccessibility. To solve these problems, Bergquist has created a "GAP Pad liquid", thermal filler ...