Rack Cable Management

What is rack cable management?Rack cable management covers a range of products used to manage and organise network cables within a server rack cabinet. Why do you need cable management?This range of 19 rack accessories prevents any cables from accidentally being unplugged or pulled out of servers and protects the integrity of your network. Sprawling cables can also be a trip hazard.Organising your cables enables you to easily and quickly make changes to existing rack servers, maintain your hardware or install new hardware. You can do all of this without having to unplug anything or navigate through tangled cables.Typical SolutionsCable organiserA cable organiser, sometimes referred to as a cable manager, cable carrier or cable tidy can be horizontal or vertical. They help to bundle and route cables. This provides easy access to the cables and you can easily identify cables within the bundle. Many cable tidies feature rings that cables can be fed through, helping you to keep cabling neat. The rings can be made from plastic, metal or velcro. Cable managers offer extra support to cables, preventing strain and enhancing the lifespan of your network cables.Cable TrayCables can be rested on cable trays and routed around the server cabinet. These do not normally have a ring or loop like cable managers, but are often have gaps or vents that help to prevent overheating.Cable Entry PanelA cable entry panel sometimes called a cable entry seal or brush strip seal is an additional way of protecting your network hardware. Cables are run through the opening of the panel which prevents dust and dirt from entering the data cabinet with the cable. They contain a brush that removes contaminants and prevents contaminants from entering the server cabinet. Some feature an internal latch that cannot be opened without a key. This means that even if you use a cable entry seal, the integrity of a sealed cabinet is not compromised in any way.Cable Management ArmCable management arms can be attached to the racking within your server cabinet. They provide you with enough cable slack to pull running equipment out of a 19 inch rack without the need to unplug or remove any cables. Cable management arms can help to remove the stress on cables, enhancing their lifespan. They tend to be hinged or bent to offer flexibility to be used with different racking. Some are compatible with square hole racks or round hole racks, whereas some models are suitable for both types.

...
Read more Read less

Filters

Viewing 1 - 20 of 25 products
Results per page
Description Price Type Dimensions For Use With Material Height U Number of Rings
RS Stock No. 249-5573
BrandRS PRO
SGD76.66
Each
units
Cable Management Panel - 19-Inch Rack - 1U 4
RS Stock No. 802-0285
BrandRS PRO
SGD30.89
Each
units
Cable Entry Panel 483 mm x 10 mm x 1 Uin 1U Rack Unit Steel 1U -
RS Stock No. 802-0298
BrandRS PRO
SGD17.00
Each
units
Cable Entry Panel 483 mm x 9 mm x 1 Uin 1U Rack Unit Steel 1U -
RS Stock No. 243-1866
BrandRS PRO
SGD89.10
Each
units
Cable Entry Panel - 19-Inch Panel Steel 2U -
RS Stock No. 738-8681
BrandRS PRO
SGD16.52
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 802-0289
BrandRS PRO
SGD43.30
Each
units
Cable Entry Panel 483 mm x 10 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 802-0291
BrandRS PRO
SGD18.75
Each
units
Cable Entry Panel 483 mm x 9 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 738-8685
BrandRS PRO
SGD16.52
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 839-0055
Mfr. Part No.854-09207 THCO1
SGD53.48
Each
units
Cable Organizer with Metal Ring - Cable Management - 1U -
RS Stock No. 839-0067
Mfr. Part No.854-09233 WMB1H
SGD89.67
Each
units
Cable Organiser Single Sided 482.6 x 76.2 x 76.2mm Cable Management Plastic 2U -
RS Stock No. 779-4137
Mfr. Part No.AR8429
BrandAPC
SGD87.01
Each
units
Cable Organiser 483 x 44 x 15mm InfraStruXure, ISX Racks Steel - -
RS Stock No. 826-2852
Mfr. Part No.5502255
BrandRittal
SGD55.35
Each
units
Cable Entry Panel 390 mm x 20 mm x 1 Uin Enclosure Type TS IT Steel 1U -
RS Stock No. 826-2849
Mfr. Part No.7112000
BrandRittal
SGD11.056
Each (In a Pack of 10)
units
Cable Shunting Ring - TS IT Cabinet Carbon Steel - -
RS Stock No. 369-0195
Mfr. Part No.DZCC11AD
BrandAccuride
SGD85.57
Each
units
Cable Carrier 425.4 x 75.5 x 34mm 2 U and Above High Unit Steel - -
RS Stock No. 826-2843
Mfr. Part No.7111900
BrandRittal
SGD12.506
Each (In a Pack of 10)
units
Cable Shunting Ring - TS IT Cabinet Carbon Steel - -
RS Stock No. 826-2837
Mfr. Part No.8908084
BrandRittal
SGD111.72
Each
units
Cable Tray - TS IT Cabinet Steel - -
RS Stock No. 580-168
Mfr. Part No.DZCC5AD
BrandAccuride
SGD71.06
Each
units
Cable Carrier 412.5 x 63.5 x 22.4mm 2 U and Above High Unit Steel - -
RS Stock No. 721-2837
Mfr. Part No.20118729
SGD138.23
Each
units
Cable Support w/ Return Spring 433.3 x 15.9 x 66.9mm 19-Inch Cabinet Steel - -
RS Stock No. 826-2846
Mfr. Part No.7111000
BrandRittal
SGD10.67
Each (In a Pack of 10)
units
Cable Shunting Ring - TS IT Cabinet Carbon Steel - -
RS Stock No. 721-2834
Mfr. Part No.20118706
SGD73.66
Each
units
Cable Support w/o Return Spring 424.5 x 24 x 61.5mm 19-Inch Cabinet Steel - -
Related Products
3U outrigger or 1Upanel style units with adjustable ...
Description:
3U outrigger or 1Upanel style units with adjustable ties3U outrigger incorporates slotted brackets measuring 3U in height1U notched brackets that may be snapped off to provide 1U or 2U dropsBrackets may be slid under existing patch panel mountingsL-shaped section of ...
2.5mm thick aluminiumFront anodisedRear yellow chromate coated (conductive)Type ...
Description:
2.5mm thick aluminiumFront anodisedRear yellow chromate coated (conductive)Type 2b available as kits: one panel, two press-in location dowels and EMC gasket materialFixing accessories to be ordered separately: plastic studs.
2.5mm thick aluminiumFront anodisedRear yellow chromate coated (conductive)Type ...
Description:
2.5mm thick aluminiumFront anodisedRear yellow chromate coated (conductive)Type 2b available as kits: one panel, two press-in location dowels and EMC gasket materialFixing accessories to be ordered separately: plastic studs.
A Schroff CompacPRO rear panel which is screwed ...
Description:
A Schroff CompacPRO rear panel which is screwed to the rear frame of the case. Rear panel with perforation, anodised 2mm thick aluminium, cut edges plainRoHS compliant.