D-sub Connector Contacts

A D-sub connector is a form of connector commonly found in electronic and computer systems. It consists of a D shaped metal band and two or more parallel rows of either pin contacts (male) or socket contacts (female). D-sub connector contacts can vary in size, material, current rating, length and resistance.

The most common type of connector is the crimp contact. These are assembled by inserting a stripped wire end into the cavity at the rear of the contact. The cavity is then crushed using a crimp tool, gripping the contact to the wire.

What are D-sub connector contacts used for?

The D-sub connector contacts carry the signal from the source to the destination across the D–sub connection.

Types of D-sub connector contacts

Most D-sub connectors are supplied with contacts ready in place. Contacts can be replaced if damaged or if the application of the D-sub connector is to be changed from the original design specification.

High-current, high-voltage, or co-axial inserts require larger contacts. The material of the D-sub connector contact can be changed if the robustness or quality of the connection needs to be improved.


...
Read more Read less

Filters

Viewing 401 - 411 of 411 products
Results per page
Description Price Gender Contact Material Contact Plating Maximum Contact Resistance Minimum Wire Size mm² Wire Size Contact Type Maximum Wire Size mm² Minimum Wire Size AWG Series Contact Size Maximum Wire Size AWG Current Rating Termination Method
RS Stock No. 309-4137
Mfr. Part No.FME010P102 / 1731120048
BrandFCT
SGD11.90
Each
units
Male Copper Alloy Gold over Nickel - - - Coaxial - - FME - - 2A Solder
RS Stock No. 680-9676
Mfr. Part No.5-166053-1
SGD0.826
Each (In a Pack of 10)
units
Male Brass Gold over Nickel - - 24 → 20 AWG - - - AMPLIMITE HD-20 - - - Crimp
RS Stock No. 139-3657
Mfr. Part No.09560008275
BrandHARTING
SGD0.452
Each (In a Pack of 500)
units
Female Copper Alloy PdNi - 0.14mm² 26 → 24 AWG Pin 0.22mm² 26AWG D-Sub - 24AWG 6.5A Crimp
RS Stock No. 693-1098
Mfr. Part No.09691827420
BrandHARTING
SGD5.53
Each
units
Female Copper Alloy Gold - - 20 → 16 AWG Power - - - - - 10A Crimp
RS Stock No. 782-9757
Mfr. Part No.205202-7
SGD0.922
Each (In a Pack of 50)
units
Male Brass Gold over Nickel - - 24 → 20 AWG - - - AMPLIMITE HDP-20 20 - - Crimp
RS Stock No. 693-0890
Mfr. Part No.09670007267
BrandHARTING
SGD0.194
Each (In a Pack of 100)
units
Female Brass Gold over Nickel - - 28 → 24 AWG - - - - - - 7.5A Crimp
RS Stock No. 2508369798
Mfr. Part No.DHA-2102
SGD18.16
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508134968
Mfr. Part No.DCTESX1020AF
SGD76.47
1 Pack of 1000
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508134974
Mfr. Part No.DCHESX1022AF
SGD165.87
1 Pack of 1000
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2509608458
Mfr. Part No.DHA-2101
SGD18.16
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508134930
Mfr. Part No.DCHEPX1022AF
SGD170.32
1 Pack of 1000
Pack(s)
- - - - - - - - - - - - - -
Related Products
These Coaxial contact inserts are for use with ...
Description:
These Coaxial contact inserts are for use with the FCI DW Series of D-Subminiature Connectors. A range of inserts that meet KNX Standard requirements.Note: the description of the inserts is given based on the central contact.
These Coaxial contact inserts are for use with ...
Description:
These Coaxial contact inserts are for use with the FCI DW Series of D-Subminiature Connectors. A range of inserts that meet KNX Standard requirements.Note: the description of the inserts is given based on the central contact.
Tinned metal housing with laminated ribbing for the ...
Description:
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.
A range of Coax, power and high-voltage contacts ...
Description:
A range of Coax, power and high-voltage contacts from FCT. Power and coax contacts matching “D” hybrid contact plug housingsContacts snap into housingCan be removed using the ejection toolPower contacts have soldered terminalsCoax contacts (straight type) accept RG178B/U and RG174A/U ...