Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device. 


What are distribution blocks used for?

Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets. 
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.

Types of distribution blocks

The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 41 - 60 of 73 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 187-9900
Mfr. Part No.3270157
SGD98.69
1 Bag of 5
Bag(s)
16 Push In 26 → 14 (Solid, Flexible) AWG Polyamide - 37A 250 V 0.14 → 1.5 (Flexible) mm², 0.14 → 2.5 (Solid) mm² 63.6mm 8.3mm 54mm Black, Grey - -
RS Stock No. 138-3507
Mfr. Part No.1561790000
BrandWeidmuller
SGD36.217
Each (In a Pack of 3)
units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Green +130°C -50°C
RS Stock No. 383-1633
Mfr. Part No.1SNA115338R2500
BrandEntrelec
SGD71.50
Each
units
2 Clamp 6 AWG - - 200A 800 V 10-70 inputmm² 114mm - 56.7mm Grey - -
RS Stock No. 138-3494
Mfr. Part No.1560730000
BrandWeidmuller
SGD12.384
Each (In a Pack of 5)
units
2 (Input), 2 (Output) Screw 14 → 4 AWG Wemid - 152 A, 90 (UR) A 1 kV ac/dc, 600 V 16 mm², 25 mm² 17.8mm 49.3mm 55.7mm Grey +130°C -50°C
RS Stock No. 138-3499
Mfr. Part No.1561680000
BrandWeidmuller
SGD26.818
Each (In a Pack of 5)
units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Grey +130°C -50°C
RS Stock No. 138-3504
Mfr. Part No.1561770000
BrandWeidmuller
SGD36.217
Each (In a Pack of 3)
units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Grey +130°C -50°C
RS Stock No. 138-3506
Mfr. Part No.1561820000
BrandWeidmuller
SGD36.217
Each (In a Pack of 3)
units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Brown +130°C -50°C
RS Stock No. 187-9906
Mfr. Part No.3273356
SGD86.57
1 Bag of 8
Bag(s)
13 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 41mm 21.7mm Red - -
RS Stock No. 187-9907
Mfr. Part No.3273376
SGD117.08
1 Bag of 8
Bag(s)
19 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 56.45mm 21.7mm Blue - -
RS Stock No. 138-3502
Mfr. Part No.1561670000
BrandWeidmuller
SGD29.75
Each (In a Pack of 5)
units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Green +130°C -50°C
RS Stock No. 239-5136
Mfr. Part No.7601.2101.8
BrandKopp
SGD29.37
Each
units
2 - - - - 16A - - - - - - - -
RS Stock No. 277-9809
Mfr. Part No.0 048 30
BrandLegrand
SGD13.31
Each
units
4 Screw Down - PC IP20 80A 400 V ac 1.5 → 16mm² 47mm - - Green +40°C -5°C
RS Stock No. 187-9903
Mfr. Part No.3273332
SGD58.16
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Blue - -
RS Stock No. 187-9904
Mfr. Part No.3273334
SGD58.16
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Red - -
RS Stock No. 187-9905
Mfr. Part No.3273354
SGD86.57
1 Bag of 8
Bag(s)
13 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 41mm 21.7mm Blue - -
RS Stock No. 138-3503
Mfr. Part No.1561630000
BrandWeidmuller
SGD26.912
Each (In a Pack of 5)
units
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 202 A, 125 (UR) A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Black +130°C -50°C
RS Stock No. 138-3487
Mfr. Part No.1562170000
BrandWeidmuller
SGD43.89
1 Pack of 1
Pack(s)
2 (Input), 5 (Output) Screw 12 → 2 AWG Wemid - 125A 1 kV ac/dc, 600 V 16 mm², 25 mm², 35 mm² 37.1mm 53.7mm 70mm Grey +130°C -50°C
RS Stock No. 138-3509
Mfr. Part No.1561830000
BrandWeidmuller
SGD29,234.57
Each (In a Pack of 3)
units
2 (Input), 2 (Output) Screw 8 AWG Wemid - 300 A, 160 (UR) A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Black +130°C -50°C
RS Stock No. 675-8922
Mfr. Part No.0 371 71
BrandLegrand
SGD7.174
Each (In a Pack of 5)
units
1 Screw Down 10 AWG Metal - 23A 800 V 4mm² 52.2mm 6mm 46.4mm Green, Yellow +55°C -30°C
RS Stock No. 277-9837
Mfr. Part No.0 048 36
BrandLegrand
SGD46.31
Each
units
22 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 176mm - - Green +40°C -5°C
Related Products
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety ...
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Distribution terminal blocks provide fantastic reliability and are ...
Description:
Distribution terminal blocks provide fantastic reliability and are of the highest quality available across the entire range of terminals. • Easy to handle• All models rated to various voltages• Compression clamp terminals accept cable up to 4 mm², have a ...