IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.

IEC Types:
  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.
  • C5/C6- Known as a clover leaf, this power connector is used in smaller electrical appliances such as projectors.
  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.
  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.
  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler, and having a high temperature rating
  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.
  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.
  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.

...
Read more Read less

Filters

Viewing 1 - 20 of 1064 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Connector Size
RS Stock No. 776-9113
BrandRS PRO
SGD2.35
Each
units
C14 Cable Mount Male 10A Straight Screw None None 250 V ac Yes - - - -
RS Stock No. 488-191
BrandRS PRO
SGD5.04
Each
units
C14 Panel Mount Male 10A Straight Solder, Spade None - 250 V ac - - - - -
RS Stock No. 776-9122
BrandRS PRO
SGD2.51
Each
units
C13 Cable Mount Female 10A Straight Screw None None 250 V ac Yes - - - -
RS Stock No. 776-9125
BrandRS PRO
SGD4.23
Each
units
C20 Cable Mount Male 16A Straight Screw None None 250 V ac Yes - - - -
RS Stock No. 776-9138
BrandRS PRO
SGD0.67
Each
units
C13 Snap-In Female 15A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 776-9129
BrandRS PRO
SGD3.89
Each
units
C19 Cable Mount Female 16A Straight Screw None None 250 V ac Yes - - - -
RS Stock No. 811-7197
BrandRS PRO
SGD4.22
Each
units
C13 Snap-In Female 10 A, 20 A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7210
BrandRS PRO
SGD2.98
Each
units
C14 Snap-In Male 6A Straight Solder/Faston 2 Pole 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7200
BrandRS PRO
SGD0.96
Each
units
C14 Snap-In Male 10 A, 15 A Right Angle Solder None None 250 V ac - - - - -
RS Stock No. 811-7193
BrandRS PRO
SGD0.66
Each
units
C13 Screw Mount Female 10 A, 15 A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 776-9135
BrandRS PRO
SGD0.91
Each
units
C20 Panel Mount Male 20A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7216
BrandRS PRO
SGD3.27
Each
units
C14 Snap-In Male 6A Straight Solder/Faston 2 Pole 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7204
BrandRS PRO
SGD1.04
Each
units
C14 Snap-In Male 10A Straight Solder/Faston None 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7207
BrandRS PRO
SGD0.84
Each
units
C14 Panel Mount Male 10 A, 15 A Straight Solder None None 250 V ac - - - - -
RS Stock No. 776-9144
BrandRS PRO
SGD0.99
Each
units
C19 Panel Mount Female 20A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 896-2136
BrandRS PRO
SGD1.794
Each (In a Pack of 5)
units
- Panel Mount, Snap In Mount Male 20A Straight Faston - - 250 V ac - - - - -
RS Stock No. 811-7213
BrandRS PRO
SGD1.50
Each
units
C14 Screw Mount Male 10A Straight Solder/Faston None 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7226
BrandRS PRO
SGD3.54
Each
units
C14 Snap-In Male 6A Straight Solder/Faston 2 Pole 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7222
BrandRS PRO
SGD2.66
Each
units
C14 Snap-In Male 6A Straight Solder/Faston 2 Pole 1 250 V ac - 5 x 20mm - - -
RS Stock No. 811-7238
BrandRS PRO
SGD2.15
Each
units
C20 Snap-In Male 16 A, 20 A Straight Solder/Faston None None 250 V ac - - - - -
Related Products
Panel thickness 1.5mmMating socket accepted only when fuse ...
Description:
Panel thickness 1.5mmMating socket accepted only when fuse drawer is closedAccepts 20mm fuses-space provided for one spare250V ac/10A rated, fuse drawer protected to PC2, IEC 127//6Flammability Rating UL94 V-0Use insulating boot stock no. 801-932.
Fused IEC inlet connector accepting 20mm fusesFuse link ...
Description:
Fused IEC inlet connector accepting 20mm fusesFuse link is electrically separate to connectorConnection via 0.25 push on tagsFuse carrier is interlocked and cannot be removedStorage for one spare fuseRated at 240Vac/10ADepth 35mmSuitable hole cutter stock no. 542-302Use insulating boot stock ...
From Schurter, this IEC appliance inlet has a ...
Description:
From Schurter, this IEC appliance inlet has a specific shape to guarantee IP protection when using the mating connector. With a robust flange, the inlet ensures a high degree of environmental protection, and the inlet mates to IP67 and IP69K, ...
From Schurter, this rewireable cable mounting IEC connector ...
Description:
From Schurter, this rewireable cable mounting IEC connector is right angled for added convenience. With thermoplastic housing and a screw terminal, this robust connector is often used in audio/visual or ITC equipment. • Maximum cable diameter 10mm• Maximum pin temperature ...