Automotive Connector Terminals

Automotive connector terminals are standardised wire connectors made to provide a quick and simple connection point for one or more wires together to create robust and functional cable solutions. Different securing methods can be used for specific applications and across different industries. Quick latch connections for terminals that may need frequent maintenance or are often connected and disconnected or screw down terminals for a more long-term and robust application whilst still allowing flexibility in their use and reliability every time.


Electrical connectors used in applications such as cars, motorcycles and motorhomes have to be durable and reliable as they are most commonly used in parts of a vehicle that are exposed to the elements and excessive wear. Typically, automotive connector terminals are very well sealed against dust ingress and moisture, and usually have a high degree of heat resistance. Due to the excessive vibration of being installed in a vehicle, these connectors will often have secure locking systems built into the plug and socket to prevent unwanted disconnect.


Termination Types


Terminal blocks may use a variety of methods to achieve a robust and reliable wire connection.


Spring clamps


Spring clamp connections simply use the pressure of a spring to press down and retain the wire in place. Spring clamps are useful in applications using small wire diameters without the need for high strength connections as well as for use in a limited working space where screwing terminals down may be difficult.


Screw clamps


Similar to a spring clamp, use pressure to hold a wire in place but can achieve greater clamping pressure with the use of a screw to tighten the clamp over the wire. This method of electrical connection is the most classic and industry-standard termination method. This type can accommodate a very wide range of wire sizes and provides a reliable connection.


Insulation displacement connections (IDC) are a simple and easy connection method that is achieved by pushing the wire between two sharp pieces of metal, that can break the outer sheathing to allowing a connection to be made without exposing any bare wire.


Applications


Automotive connector terminals come in both pre-insulated and non-insulated forms and are suitable for use in a wide range of both commercial and industrial applications. Whether its connecting a fuse, a battery terminal or even a vehicle sensor, our range of terminals allow for easy often modular applications at a range of voltages both high and low. Terminal kits can be a great way to ensure you have a range of terminal sizes suitable for almost any situation big or small.


...
Read more Read less

Filters

Viewing 1 - 20 of 383 products
Results per page
Description Price Type Series Gender Pitch Contact Plating Contact Material Depth Colour Number of Contacts Diameter Corded Current Rating Mounting Type Termination Method
RS Stock No. 923-2256
Mfr. Part No.12124075
BrandDelphi
SGD0.192
Each (On a Reel of 3500)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 801-1095
Mfr. Part No.12124075
BrandDelphi
SGD0.186
Each (In a Pack of 100)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 923-2259
Mfr. Part No.12124076
BrandDelphi
SGD0.168
Each (On a Reel of 3500)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 801-1099
Mfr. Part No.12124076
BrandDelphi
SGD0.369
Each (In a Pack of 100)
units
- Metri-Pack 150.2 Female - - - - - - - - - - -
RS Stock No. 896-1675
Mfr. Part No.12020801
BrandDelphi
SGD0.469
Each (In a Pack of 50)
units
- Weather-Pack Female - - - - - - - - - - -
RS Stock No. 801-1008
Mfr. Part No.12129484
BrandDelphi
SGD0.076
Each (In a Pack of 100)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 923-2196
Mfr. Part No.12129484
BrandDelphi
SGD0.074
Each (On a Reel of 4500)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 801-0963
Mfr. Part No.12077628
BrandDelphi
SGD0.072
Each (In a Pack of 100)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 771-0230
Mfr. Part No.211CC2S1160P
BrandDelphi
SGD0.131
Each (In a Pack of 100)
units
- Sicma-3 Female - Tin Copper Iron Alloy - - - - - - - Crimp
RS Stock No. 136-1734
Mfr. Part No.183035-1
SGD0.244
Each (In a Bag of 5000)
units
- SuperSeal 1.5 Female - - - - - - - - - - -
RS Stock No. 314-1334
Mfr. Part No.183035-1
SGD0.403
Each (In a Pack of 100)
units
- SuperSeal 1.5 Female - - - - - - - - - - -
RS Stock No. 923-2168
Mfr. Part No.12077628
BrandDelphi
SGD0.074
Each (On a Reel of 2800)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 923-2082
Mfr. Part No.12089040
BrandDelphi
SGD0.15
Each (On a Reel of 2200)
units
- Weather-Pack Male - - - - - - - - - - -
RS Stock No. 801-0806
Mfr. Part No.12089040
BrandDelphi
SGD0.468
Each (In a Pack of 100)
units
- Weather-Pack Male - - - - - - - - - - -
RS Stock No. 801-0951
Mfr. Part No.12084200
BrandDelphi
SGD0.449
Each (In a Pack of 100)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 923-2158
Mfr. Part No.12084200
BrandDelphi
SGD0.074
Each (On a Reel of 3000)
units
- Metri-Pack 150 Female - - - - - - - - - - -
RS Stock No. 923-2192
Mfr. Part No.12129373
BrandDelphi
SGD0.074
Each (On a Reel of 4500)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 801-1001
Mfr. Part No.12129373
BrandDelphi
SGD0.149
Each (In a Pack of 100)
units
- Metri-Pack 150 Male - - - - - - - - - - -
RS Stock No. 136-1950
Mfr. Part No.3-1447221-4
SGD0.323
Each (On a Reel of 7000)
units
- SuperSeal 1.0 SKT - - - - - 1 - - - - -
RS Stock No. 680-9705
Mfr. Part No.3-1447221-4
SGD0.862
Each (In a Pack of 5)
units
- Superseal Female - - - - - - - - - - -
Related Products
A range of Metri-Pack 280 male and female ...
Description:
A range of Metri-Pack 280 male and female sealed crimp contacts for use with Metri-Pack 280 automotive connectors. These Metri-Pack 280 male and female sealed crimp contacts are made from tin brass with a tin plating.Stock numbers 801-1073 (female) and ...
A range of sealed male and female terminals ...
Description:
A range of sealed male and female terminals designed for use with the Delphi GT150 range of automotive connectors.The terminals are made from tinned brass with tin plating.Stock number 896-1928 (male) is suitable for a cable range of 0.35 to ...
A range of sealed male pin and female ...
Description:
A range of sealed male pin and female sleeve crimp terminals for use with the Weather-Pack range of sealed automotive connectors. These Weather-pack crimp terminals are made from tin brass with a tin plating.Stock numbers 801-0799 (female) and 801-0793 are ...
A range of Metri-Pack 150 unsealed crimp terminals ...
Description:
A range of Metri-Pack 150 unsealed crimp terminals for the Metri-Pack 150 range of unsealed automotive connectors. Stock numbers 801-1008 and 801-1001 have a tangless design.Stock numbers 801-0872 (female) and 801-1008 (female) are for use with a cable range of ...