Cable Moulded Parts

Filters

Viewing 1 - 20 of 260 products
Results per page
Description Price Type Inside Diameter Primary Inside Diameter Secondary Adhesive Lined Material Number of Breakouts Shrink Temperature Colour Minimum Operating Temperature Maximum Operating Temperature Shrunk Diameter Primary Shrunk Diameter Secondary Series Standards Met
RS Stock No. 265-9531
Mfr. Part No.462A011-25-0
SGD33.55
Each
units
Branching Cable Boot 13.2mm 6.6mm No Fluid Resistant Elastomer 3 +135°C Black -75°C +150°C 6.6mm 3.6mm - -
RS Stock No. 239-1392
Mfr. Part No.202K132-25-0
SGD18.78
Each
units
Straight Cable Boot 30mm 30mm No Fluid Resistant Elastomer 1 - Black -75°C +150°C 14.2mm 5.9mm - -
RS Stock No. 718-3313
Mfr. Part No.202K232-25-0
SGD43.55
Each
units
Straight Cable Boot 25mm 8mm No Fluid Resistant Elastomer 1 - - -75°C +150°C 13.8mm 3.3mm - -
RS Stock No. 279-4808
Mfr. Part No.202K132-100-0
SGD26.67
Each
units
Straight Cable Boot 30mm 15mm No LFH Polyolefin 1 - Black -30°C +105°C 14.2mm 5.9mm - -
RS Stock No. 239-1386
Mfr. Part No.202K121-25-0
SGD19.35
Each
units
Straight Cable Boot 24mm 24mm No Fluid Resistant Elastomer 1 - Black -75°C +150°C 10.4mm 5.6mm - -
RS Stock No. 170-1350
Mfr. Part No.202A153-3-0
SGD33.72
Each
units
Straight Cable Boot 36mm - No Polyolefin 1 - Black -75°C +150°C 8.6mm - - -
RS Stock No. 874-1513
Mfr. Part No.PD-CAP-1/2-0
SGD0.608
Each (In a Pack of 100)
units
PD CAP 12.7mm - - Polyolefin - +125°C Black -55°C +110°C 2.29mm - PD Caps UL E85381
RS Stock No. 718-3130
Mfr. Part No.202K232-100/180-0
SGD57.10
Each
units
Straight Cable Boot 25mm 8mm Yes LFH Polyolefin 1 - - -30°C +80°C 13.8mm 3.3mm - -
RS Stock No. 718-2843
Mfr. Part No.202D232-25-0
SGD86.16
Each
units
Straight Cable Boot 29.5mm 29.5mm No Fluid Resistant Elastomer 1 - - -75°C +150°C 18.8mm 8.4mm - -
RS Stock No. 239-1465
Mfr. Part No.222K132-25-0
SGD30.31
Each
units
Boot - - No Fluid Resistant Elastomer - - Black -75°C +150°C - - - -
RS Stock No. 170-1322
Mfr. Part No.202A121-3-0
SGD21.61
Each
units
Straight Cable Boot 24.6mm - No Polyolefin 1 - Black -75°C +150°C 5.3mm - - -
RS Stock No. 397-657
Mfr. Part No.KHKB-13359/2
SGD6.134
Each (In a Pack of 5)
units
End Cap 20mm - Yes Polyolefin - - Black -40°C +85°C 7.5mm - - -
RS Stock No. 218-1432
Mfr. Part No.382A023-25-0
SGD31.92
Each
units
Y Joint Cable Boot 26.9mm 13.2mm No Fluid Resistant Elastomer 2 +135°C Black -75°C +150°C 12.4mm 6.1mm - -
RS Stock No. 239-1459
Mfr. Part No.222K121-25-0
SGD20.09
Each
units
Boot - - No Fluid Resistant Elastomer - - Black -75°C +150°C - - - -
RS Stock No. 147-180
Mfr. Part No.222K132-25/225-CS-2065-0
SGD32.01
Each
units
Straight Cable Boot - - - Fluid Resistant Elastomer - - Black - - - - - -
RS Stock No. 239-1409
Mfr. Part No.202K142-25-0
SGD29.31
Each
units
Straight Cable Boot 31mm 31mm No Fluid Resistant Elastomer 1 - Black -75°C +150°C 18mm 7.1mm - -
RS Stock No. 218-1454
Mfr. Part No.382A034-25-0
SGD70.54
Each
units
Y Joint Cable Boot 38.6mm 26.9mm No Fluid Resistant Elastomer 2 +135°C Black -75°C +150°C 18mm 12.4mm - -
RS Stock No. 218-1397
Mfr. Part No.342A012-25-0
SGD22.77
Each
units
45° Side Breakout 13.2mm 6.6mm No Fluid Resistant Elastomer 2 +135°C Black -75°C +150°C 6.9mm 3.6mm - -
RS Stock No. 811-2681
Mfr. Part No.SKE25/63
Brand3M
SGD16.77
Each
units
End Cap - 63mm Yes Polyolefin - +121°C Black -55°C +110°C 16mm 24.9mm - -
RS Stock No. 724-2517
Mfr. Part No.DRC40-BT
BrandDeutsch
SGD10.28
Each
units
Straight Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
Related Products
Cold shrink end caps are moulded in black ...
Description:
Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on anapplicator ring for easy application on-site or in storage areas, without the need forgrease, tools or a torch; they ensure a reliable seal. They provide ...
General purpose Y-Shaped heat shrink moulded parts. These ...
Description:
General purpose Y-Shaped heat shrink moulded parts. These heat shrink boots provide strain relief and protection on cable harnesses. • Y-Shape transition• Good resistance to aggressive chemicals at high temperature• Manufactured from fluid resistant elastomer• Available with 2, 3 or ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...