Pramet

Milling & Lathing

CATEGORIES

Viewing 1 - 20 of 107 products
Compare selected 0/8
Display:
Price
(Price shown excludes GST)
Description
Part Details
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • SGD486.33Each
Pramet SDQCR Series Lathe Tool Holder for Use with DCMT 11T3, 20mm Height, 107° Approach, 180mm Length
  • Approach Angle107°
  • Lathe PartLathe Tool Holder
  • SeriesSDQCR
  • For Use WithDCMT 11T3
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • SGD229.30Each
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • Approach Angle93°
  • Lathe PartLathe Tool Holder
  • SeriesSDJCR
  • For Use WithDCMT 11T3
  • Length100mm
See similar products in Lathe Tool Holders & Inserts
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • SGD300.29Each
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • Approach Angle95°
  • Lathe PartLathe Tool Holder
  • SeriesSCLCR
  • For Use WithCC Inserts
  • Length100mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 2.38mm Height, 95° Approach, 6.4mm Length
  • SGD151.951 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 2.38mm Height, 95° Approach, 6.4mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCCMT
  • For Use WithSCLCR 06
  • Length6.4mm
See similar products in Lathe Tool Holders & Inserts
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • SGD334.871 Box of 10
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • TypeIndexable
  • ShapePentagon
  • Bore Diameter5.5mm
  • Side Length9mm
  • GradeM8345
See similar products in Milling Inserts
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • SGD200.021 Box of 10
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • Lathe PartLathe Insert
  • Approach Angle93°
  • SeriesTNMG
  • For Use WithMTJNR
  • Length16.5mm
See similar products in Lathe Tool Holders & Inserts
Pramet DCMT Series Lathe Insert for Use with SDJCR 11, 3.97mm Height, 93° Approach, 11.6mm Length
  • SGD216.191 Box of 10
Pramet DCMT Series Lathe Insert for Use with SDJCR 11, 3.97mm Height, 93° Approach, 11.6mm Length
  • Lathe PartLathe Insert
  • Approach Angle93°
  • SeriesDCMT
  • For Use WithSDJCR 11
  • Length11.6mm
See similar products in Lathe Tool Holders & Inserts
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • SGD184.231 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCCMT
  • For Use WithSCLCR 09
  • Length9.7mm
See similar products in Lathe Tool Holders & Inserts
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • SGD298.35Each
Pramet SCLCR/L Series Lathe Tool Holder for Use with CCMT 09T3, 16mm Height, 95° Approach, 150mm Length
  • Approach Angle95°
  • Lathe PartLathe Tool Holder
  • SeriesSCLCR/L
  • For Use WithCCMT 09T3
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Pramet End Mill, 25mm Cutter, 25 mm Shank, 80mm Cut
  • SGD650.28Each
Pramet End Mill, 25mm Cutter, 25 mm Shank, 80mm Cut
  • Cutter Diameter25mm
  • Cut Length80mm
  • Overall Length170 mm
  • Shank TypePlain
  • Shank Diameter25 mm
See similar products in End Mills
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • SGD423.85Each
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesPWLN(RL) INT
  • For Use WithWNMG 0604
  • Length180mm
See similar products in Lathe Tool Holders & Inserts
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • SGD197.501 Box of 10
Pramet TNMG Series Lathe Insert for Use with MTJNR, 4.76mm Height, 93° Approach, 16.5mm Length
  • Approach Angle93°
  • Lathe PartLathe Insert
  • SeriesTNMG
  • For Use WithMTJNR
  • Length16.5mm
See similar products in Lathe Tool Holders & Inserts
Pramet DU / D Series Lathe Tool Holder for Use with XLCFN 32, 25mm Height, 90° Approach, 110mm Length
  • SGD515.82Each
Pramet DU / D Series Lathe Tool Holder for Use with XLCFN 32, 25mm Height, 90° Approach, 110mm Length
  • Approach Angle90°
  • Lathe PartLathe Tool Holder
  • SeriesDU / D
  • For Use WithXLCFN 32
  • Length110mm
See similar products in Lathe Tool Holders & Inserts
Pramet Rhombic Milling Insert 16mm Side Length, 4.5mm Bore Diameter
  • SGD271.751 Box of 10
Pramet Rhombic Milling Insert 16mm Side Length, 4.5mm Bore Diameter
  • TypeIndexable
  • ShapeRhombic
  • Bore Diameter4.5mm
  • Side Length16mm
See similar products in Milling Inserts
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • SGD1,053.70Each
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • Diameter63mm
  • Bore Size22mm
  • Number of Inserts5
  • Depth of Cut2mm
  • Height40mm
See similar products in Face Mills
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • SGD232.97Each
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesDTGNR
  • For Use WithTN/TNM Inserts
  • Length125mm
See similar products in Lathe Tool Holders & Inserts
Pramet 19° Face Mill 52mm, Diameter, 4, Pieces
  • SGD884.07Each
Pramet 19° Face Mill 52mm, Diameter, 4, Pieces
  • Diameter52mm
  • Bore Size22mm
  • Number of Inserts4
  • Depth of Cut2mm
  • Number of Pieces4
See similar products in Face Mills
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • SGD230.441 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
See similar products in Lathe Tool Holders & Inserts
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • SGD244.63Each
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • Approach Angle90°
  • Lathe PartLathe Tool Holder
  • SeriesXLCFN
  • For Use WithLFMX Inserts
  • Length150mm
See similar products in Lathe Tool Holders & Inserts
Pramet TPMR Series Lathe Insert, 3.18mm Height, 16.5mm Length
  • SGD198.031 Box of 10
Pramet TPMR Series Lathe Insert, 3.18mm Height, 16.5mm Length
  • Lathe PartLathe Insert
  • SeriesTPMR
  • Length16.5mm
  • Height3.18mm
See similar products in Lathe Tool Holders & Inserts
Recently Searched
Frequently Asked Questions
Need help?
Call our Customer Services team on:
+65 6865 3433 (Tel)
Our Services
About RS
Hot Topics
Singapore contacts
+65 6865 3400
© RS Components Pte Ltd
133 CECIL STREET #14 - 01 KECK SENG TOWER SINGAPORE 069535
Payment options