ABB Jokab AFS Series Contactor, 24 V dc Coil, 3-Pole, 30 A, 7.5 kW, 3NO, 600 V ac

Need to constantly flip a system on and off? Help to extend its life cycle with this contactor from ABB Jokab. The fast-acting switch is designed to continuously make or break an electric circuit, so keeps high-current load devices running reliably. Mirror contacts boost the safety stakes by monitoring and instantly reacting to the unit's switched state. A mechanical switching frequency of 3,600 cycles per hour keeps it going at a pace that meets the needs of demanding systems. As this contactor comes with a protective cover, it cuts out the risk of unauthorised manual operation.

• Built-in surge suppression prevents power spikes from damaging equipment
• IP20-rated enclosure that's touch-proof and protected against objects larger than 12mm
• Bright yellow housing makes it quick and easy to identify as a safety device
• Screw terminals hold wires securely, so there's minimal need for re-tightening

• Commercial and industrial lighting systems
• Water pumps
• Food and beverage industries
• Cold storage facilities

AFS09Z ... AFS38Z contactors are designed for machine safety applications. They are delivered with fixed front-mounted auxiliary contact blocks making them ideal for monitoring and controlling circuits. Mechanically linked and mirror contacts make your system safer. - control circuit with electronic coil interface: - dedicated 24 V DC for direct control by PLC-output ≥ 250 mA, low holding consumption up to 1.7 W - reduced panel energy consumption - mirror and mechanically linked contacts, with front marked symbol, always guaranteeing the right contactor status

control circuit with electronic coil interface
dedicated 24 V DC for direct control by PLC-output
Mirror and mechanically linked contacts
Front-mounted auxiliary contact block
Protective cover to prevent manual operation
Minimum switching capacity 12 V / 3 mA
Built-in surge suppression

Yes. With a low power holding consumption of up to 1.7W, you can count on the unit to reduce your control panel energy usage.