SPST Push Button Pendant Station

Created and designed for predominantly standard or medium-duty control circuit applications, Schneider Electrics push-button pendant station provide a covering case for the internal push button. The enclosures are made up from a rugged, double insulated thermoplastic material. This unit is a simple yet effective mechanical switch which is commonly used to control the hoist and lowering function within a machine or device. Strategically designed for easy handling and operation, even when the user is wearing heavy work gloves.

Pre-assembled pendants for common crane applications
Shrouded, base-mounted, key-release ’Stop’ pushbutton
Switching current 10A
Right / left / hoist / lower functions

• Brought to you complete and pre-assembled
• Double insulated
• Shock and corrosive resistant
• Ease of operation
• Right, left, hoist and lower functions

• Check that the screws on the rear cover are properly tightened
• Check the condition and secureness regularly
• Try to use the genuine replacement parts for any your control stations when needed

Forming part of Schneider Electrics Harmony XAC range, this pendant features four push-buttons and one emergency stop button.

• Aesthetically pleasing, finished with bright yellow colour, making it easy to locate
• Mechanically durable up to 1000000 cycles
• The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle
• Complete and ready to use
• The connection terminals are screw clamp terminals, 1 x 2.5 mm² with or without cable end and screw clamp terminals, 2 x 1.5 mm² with or without cable end
• The ambient temperature to operate this type of controller is -25…70 °C
• 10 A conventional enclosed thermal current
• Toxic heavy metal and mercury-free

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support