- RS Stock No.:
- 164-3486
- Mfr. Part No.:
- 471-014
- Manufacturer:
- Digilent
This product is currently unavailable to backorder.
Unfortunately, we don’t have this product in stock and it’s not available to backorder at this time.
Added
Price Each
SGD609.55
(exc. GST)
SGD664.41
(inc. GST)
Units | Per unit |
1 + | SGD609.55 |
- RS Stock No.:
- 164-3486
- Mfr. Part No.:
- 471-014
- Manufacturer:
- Digilent
Technical data sheets
Legislation and Compliance
Product Details
Digilent Zybo Z7-10 Development Board
The Digilent Zybo Z7-10 is a feature-rich, ready-to-use embedded software and digital circuit board built around the Xilinx Zynq-7000 family. The Zynq family is based on the Xilinx all programmable system-on-chip (AP SoC) architecture that tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. This board has a rich set of multimedia and connectivity peripherals to create a formidable single-board computer along with the flexibility and power added by the FPGA. The board also has a video-capable feature set that includes a MIPI CSI-2 compatible Pcam connector, HDMI input, HDMI output, and high DDR3L bandwidth. It is an affordable solution for the high-end embedded vision applications that make Xilinx FPGAs popular.
Features and Benefits
667MHz dual-core Cortex-A9 processor
DDR3L memory controller with 8 DMA channels and 4 high-performance AXI3 slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
Programmable from JTAG, Quad-SPI flash, and microSD card
Programmable logic equivalent to Artix-7 FPGA
1 GB DDR3L with a 32-bit bus at 1066 MHz
16 MB Quad-SPI flash with factory programmed
128-bit random number and 48-bit globally unique EUI-48/64 compatible identifier
Powered from USB or any 5V external power source
Gigabit Ethernet PHY
USB-JTAG programming circuitry
USB-UART bridge
USB 2.0 OTG PHY with host and device support
6 push-buttons (2 processor connected)
4 slide switches
5 LEDs (1 processor connected)
2 RGB LEDs
DDR3L memory controller with 8 DMA channels and 4 high-performance AXI3 slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
Programmable from JTAG, Quad-SPI flash, and microSD card
Programmable logic equivalent to Artix-7 FPGA
1 GB DDR3L with a 32-bit bus at 1066 MHz
16 MB Quad-SPI flash with factory programmed
128-bit random number and 48-bit globally unique EUI-48/64 compatible identifier
Powered from USB or any 5V external power source
Gigabit Ethernet PHY
USB-JTAG programming circuitry
USB-UART bridge
USB 2.0 OTG PHY with host and device support
6 push-buttons (2 processor connected)
4 slide switches
5 LEDs (1 processor connected)
2 RGB LEDs
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
BS EN 61340-5-1:2007
Specifications
Attribute | Value |
---|---|
Classification | Development Board |
Kit Classification | Development Board |
Featured Device | Zybo Z7-10 |
Kit Name | Zynq-7000 ARM/FPGA SoC Development Board |