- RS Stock No.:
- 184-8286
- Mfr. Part No.:
- BM2LB300FJ-CE2
- Manufacturer:
- ROHM
Discontinued product
- RS Stock No.:
- 184-8286
- Mfr. Part No.:
- BM2LB300FJ-CE2
- Manufacturer:
- ROHM
Technical data sheets
Legislation and Compliance
Product Details
The BM2LB300FJ-C is an automotive 2ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.
Built-in overcurrent limiting circuit (OCP)
Built-in thermal shutdown circuit (TSD)
Built-in active clamp circuit
Direct control enabled from CMOS logic IC, etc.
On-state resistance RON=300mΩ (Typ) (when VIN=5V, ID=0.5A, Tj=25°C)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Built-in thermal shutdown circuit (TSD)
Built-in active clamp circuit
Direct control enabled from CMOS logic IC, etc.
On-state resistance RON=300mΩ (Typ) (when VIN=5V, ID=0.5A, Tj=25°C)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Specifications
Attribute | Value |
---|---|
Power Switch Type | Low Side Switch |
Power Switch Topology | Low Side |
Switch On Resistance | 840mΩ |
Number of Channels | 2 |
Maximum Operating Supply Voltage | 5.5 V |
Maximum Operating Current | 2.7A |
Mounting Type | Surface Mount |
Package Type | SOP |
Pin Count | 8 |
Maximum Operating Temperature | +150 °C |
Minimum Operating Temperature | -40 °C |
Dimensions | 4.9 x 3.9 x 1.37mm |
Series | IPD Series |
Automotive Standard | AEC-Q100 |