- RS Stock No.:
- 454-7799
- Mfr. Part No.:
- LC1DT25B7
- Manufacturer:
- Schneider Electric
- RS Stock No.:
- 454-7799
- Mfr. Part No.:
- LC1DT25B7
- Manufacturer:
- Schneider Electric
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- ID
Product Details
Schneider Electric LC1DT25B7 Contactor
The Schneider Electric LC1DT25B7 model is a 4 pole contactor featuring a 24 V ac operating coil, with an AC-3 full load current rating of 25 A.
Both the primary and secondary sections are supplied by an off-line flyback circuit based on VIPER267KDTR high voltage converter for ultra-wide input which provides regulated voltages to the control board, the gate driver ICs and the signal conditioning circuits.
Formal testing and measurement results confirm the ability and performance of ST power products combined with comprehensive digital control to deliver high efficiency, power factor near unity, and low THD across wide input voltage and load conditions.
Formal testing and measurement results confirm the ability and performance of ST power products combined with comprehensive digital control to deliver high efficiency, power factor near unity, and low THD across wide input voltage and load conditions.
•System architecture based on transition mode boost PFC, half bridge LCC and synchronous rectification (full bridge)
•270-480 VAC input voltage range
•Output can be configured in constant current (CC) or constant voltage (CV) mode:
o300 W maximum O/P power rating
oCV mode: 48.5 V ± 1%
oCC mode: 6.25 A ± 2.5% with voltage drop from 36 to 48 V
•Peak efficiency >93.5%
•Power Factor > 0.9 for load > 33% of max. load of the input voltage range
•THD < 20% for load > 25% of max. load of the input voltage range
•Dimming control in CC mode configuration:
o0-10 V control
o1% resolution
oanalog dimming
•Soft start
•Protections: I/P and O/P under and overvoltage protection, O/P open/no load circuit protection, O/P short/overload circuit protection
•Digitally controlled by STM32F334R8
•RoHS compliant
•WEEE compliant (2012/19/UE RAEE II)
•270-480 VAC input voltage range
•Output can be configured in constant current (CC) or constant voltage (CV) mode:
o300 W maximum O/P power rating
oCV mode: 48.5 V ± 1%
oCC mode: 6.25 A ± 2.5% with voltage drop from 36 to 48 V
•Peak efficiency >93.5%
•Power Factor > 0.9 for load > 33% of max. load of the input voltage range
•THD < 20% for load > 25% of max. load of the input voltage range
•Dimming control in CC mode configuration:
o0-10 V control
o1% resolution
oanalog dimming
•Soft start
•Protections: I/P and O/P under and overvoltage protection, O/P open/no load circuit protection, O/P short/overload circuit protection
•Digitally controlled by STM32F334R8
•RoHS compliant
•WEEE compliant (2012/19/UE RAEE II)
Specifications
Attribute | Value |
---|---|
Coil Voltage | 24 V ac |
Number of Poles | 4 |
Contact Voltage Rating | 690 V ac |
Contact Current Rating | 25 A |
Range | TeSys D |
Series | LC1D |
Normal State Configuration | 4NO |
Number Of Auxiliary Contacts | 2 |
Auxiliary Contact Configuration | 1NO + 1NC |
Terminal Type | Screw |
Width | 45mm |
Length | 85mm |
Depth | 90mm |
Better World Product | Yes |
Better World Verification | Green Premium |
Maximum Operating Temperature | +60°C |
Minimum Operating Temperature | -40°C |